Important Safety Instructions - LG MU5R40 Installation Manual

• Do not allow water to run into electric parts. Install the unit
away from water sources. There is risk of fire, failure of the
product, or electric shock.
• Do not store or use or even allow flammable gas or com-
bustibles near the product. There is risk of fire.
• Do not use the product in a tightly closed space for a long
time. Perform ventilation regularly. Oxygen deficiency could
occur and hence harm your health.
• Do not open the front grille of the product during operation. (Do
not touch the electrostatic filter, if the unit is so equipped.)
There is risk of physical injury, electric shock, or product failure.
• If strange sound, smell or smoke comes from product.Immedi-
ately turn the breaker off or disconnect the power supply
cable. There is risk of electric shock or fire.
• Ventilate the product room from time to time when operating it
together with a stove, or heating element etc. Oxygen defi-
ciency can occur and hence harm your health.
• When the product is not to be used for a long time, disconnect
the power supply plug or turn off the breaker. There is risk of
product damage or failure, or unintended operation.
• Take care to ensure that nobody especially kids could step on
or fall onto the outdoor unit. This could result in personal injury
and product damage.
• Take care to ensure that power cable could not be pulled out
or damaged during operation. There is risk of fire or electric
shock.
• Do not place anything on the power cable. There is risk of fire
or electric shock.
• When flammable gas leaks, turn off the gas and open a win-
dow for ventilation before turning on the product. Do not use
the telephone or turn switches on or off. There is risk of explo-
sion or fire.
• Make sure to ventilate sufficiently when this air conditioner
and a heating appliance such as a heater are used simultane-
ously. Failure to do so may result in fire, serious injury, or prod-
uct failure.
• Periodic ( more than once/year ) cleaning of the dust or salt
particles stuck on the heat exchanger by using water.

IMPORTANT SAFETY INSTRUCTIONS

5