Table of Contents
Advertisement
Appendix
Bluetooth is not working well
If another Bluetooth device is not located or there are connection problems or
performance malfunctions, try the following:
Ensure that the device you wish to connect with is ready to be scanned or connected
•
to.
Ensure that your device and the other Bluetooth device are within the maximum
•
Bluetooth range (10 m).
On your device, open Settings, tap Connections, and then tap the Bluetooth switch
•
to re-activate it.
On your device, open Settings, tap General management → Reset → Reset Wi-Fi
•
and Bluetooth settings → Reset settings to reset network settings. You may lose
registered information when performing the reset.
If the tips above do not solve the problem, contact a Samsung Service Centre.
A connection is not established when you connect the device to a
computer
Ensure that the USB cable you are using is compatible with your device.
•
Ensure that you have the proper driver installed and updated on your computer.
•
Your device cannot find your current location
GPS signals may be obstructed in some locations, such as indoors. Set the device to use
Wi-Fi or a mobile network to find your current location in these situations.
Data stored in the device has been lost
Always make backup copies of all important data stored in the device. Otherwise, you
cannot restore data if it is corrupted or lost. Samsung is not responsible for the loss of
data stored in the device.
144
Advertisement
Table of Contents
