Technics QUARTZ SA-GX100 Service Manual page 9

SA-GX100 ©
Procedure Procedure
Bass Knob
P.C.B. Connector
(CN906, CN907)
Treble Knob
" Connector
(CN502) 7)
1. Pull out the bass knob and treble knob.
2. Remove the 7 screws (@~@).
3. Remove the tone control P.C.B. in the direction of
the arrow. (Take care of CN502.)
Removal of the operation P.C.B. and
balance VR P.C.B.
@ Balance VR P.C.B.
1. Pull out the balance knob.
2. Remove the 1 screw (Q).
1. Remove the 4 screws (O~®).
2. Remove the FL drive P.C.B. in the direction of the
arrow. (Take care of CN906, CN907.)
Hf Operation P.C.B.
1. Remove the 8 screws (Q~Q).
2. Release the 5 claws.
Procedure
1-2--4-5
6-7
Cellophone Tape
Balance Knob
Procedure
12-68
Remote Sensor P.C.B.
¢Remove the remote sensor P.C.B. in the direction of
the arrow.