Related Manuals for anko ND-16D2P
Summary of Contents for anko ND-16D2P
- Page 1 Flame Effect Fireplace Heater ND-16D2P Instruction Manual To ensure proper operation of this device, please read this instruction manual carefully before using the device and keep it for further reference.
- Page 2 GENERAL CARE AND SAFETY GUIDE YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Page 3 • Use only the voltage specified on the rating label of the appliance. • Keep all objects at least 1 metre from the front, sides and rear of the appliance. • This appliance is intended for household use only and not for commercial or industrial use.
- Page 4 • Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use. •...
- Page 5 • This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored. • This appliance shall not be located immediately below socket- outlet. • If your appliance does not work or is not working properly, return the product to Kmart/Target.
- Page 6 FEATURES OF YOUR FLAME EFFECT ELECTRIC HEATER Display window Tip-over safety switch (inside) Control panel cover Sturdy stable feet Air outlet Adjustable Heating Flame ON/OFF thermostat setting adjustment switch knob switch knob...
- Page 7 COMPONENTS 1X Heater body 4X Sturdy stable foot 16X Screw ST 4X18 mm YOUR FLAME EFFECT ELECTRIC HEATER Congratulations on the purchase of your new Heater. Before using your new heater, it is important that you read and follow the instructions in this Use and Care booklet, even if you feel that you are quite familiar with this appliance.
-
Page 8: Control Panel
1. Place the heater upside down on a soft cloth or carpet (To avoid causing any damage during assembly of the feet). 2. Position the feet to align with the corresponding holes location on the base of the heater, secure with screws supplied and tighten them with screw driver. -
Page 9: Operation
OPERATION When operated for the first time, the unit may emit an unpleasant burning type smell. This is normal, and will disappear after a short period of use. Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure that all packaging has been removed from the unit before use. -
Page 10: Thermal Safety Cut-Out
THERMAL SAFETY CUT-OUT This appliance is fitted with a safety cut out, which will operate if the heater overheats (eg, due to blocked air outlet). For safety reasons, the heater will NOT automatically reset. To reset the heater, disconnect the heater from the power outlet. Let the heater cool down before reconnecting the heater to the power outlet and switching it back on. -
Page 11: Care And Cleaning
CARE AND CLEANING • Before cleaning, ensure that the heater is switched in the off position and is unplugged from the socket. • Clean the exterior surfaces of the heater with a dry, soft cloth. • Never use any form of detergents or solvents to clean the heater. - Page 12 2 Kendall Street, Williams Landing, Mulgrave Vic 3170 Vic, 3027 Customer Service: 1800 124 125 Customer Service: 1300 753 567 (Australia) or 0800 945 995 or via Customer Help at (New Zealand) or via target.com.au/help/contact-us Customer Help at kmart.com.au Cat. No. ND-16D2P November 2023...
Need help?
Do you have a question about the ND-16D2P and is the answer not in the manual?
Questions and answers