Download Print this page

Table Of Contents - Sealey CH4200.V3 Instruction Manual

Cabinet heater

Advertisement

Contents
1 SAFETY
1.1 GENERAL SAFETY
8 Documents / Resources
8.1 References
9 Related Posts
SAFETY
THIS PRODUCT IS NOT SUITABLE FOR PRIMARY HEATING PURPOSES
GENERAL SAFETY
☐ WARNING! Only to be used with Butane gas - DO NOT use Propane gas with this heater.
☐ WARNING! Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous
and will invalidate the warranty.
✓ Store Butane gas cylinders in accordance with the regulations applicable.
✓ Ensure that nothing stands or passes in front of the heater. Mandatory minimum distance from the heater is 1
metre.
✓ Position the heater so that it is facing towards the middle of a room and away from furnishings, furniture, fabrics
and walls etc.
✓ Use only in a well ventilated area. A ventilation opening must run to the outside of the premises where the
heater is to be operated.
✓ Use the supplied pressure regulator only.
✓ If the smell of gas is detected, or a leak suspected, turn the container's gas valve off immediately.
DO NOT turn it back on again until the leak has been detected.
DO NOT disconnect the regulator. Ensure there are no naked flames or ignition sources present and
DO NOT switch any electrical equipment or switches on or off. Open windows and doors to increase ventilation.
Check all the gas connections. To check for leaks, the use of a foamy soap solution or leak detector spray is
recommended. Brush the fittings with the solution or apply detector spray onto them and gently open the regulator
tap. A leak will form bubbles in the solution. If a leak is found, turn the tap off and
DO NOT use the heater until it has been inspected and repaired by a competent gas engineer.
✓ Ensure that the heater is correctly turned off when not in use.
✓ Take care placing the heater on a smooth surface, where it could easily be moved or pivot on its castors, if

Advertisement

loading