Table of Contents
Advertisement
4. Troubleshooting
4-6. Servicing Information
4-6-1. USB Download Method (Main SW & e-Manual)
Samsung may offer upgrades for TV's firmware in the future.
Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
1.
Insert a USB drive containing the firmware (
T-MST5DEUC) upgrade into the USB port on the rear of the TV.
2.
Press the
MENU button to display the menu. Press the
button to select "Support", then press the ENTER button.
3.
Press the
or
button to select "Software Upgrade", then
press the ENTER button to select "By USB". The message
"Scanning for USB. It may take up to 1 minute." is displayed.
4.
The message "Upgrade version XXXX to version XXXX?
The system will be reset after upgrade." is displayed.
Press the
or
to select the "OK", then press the ENTER
button.
Please be careful to not disconnect the power or remove the
USB drive while upgrades are being applied. The TV will turn off
and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are
complete. When software is upgraded, video and audio settings
you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can
easily reset them after the upgrade.
4-82
T-MST4DEUC /
or
Advertisement
Table of Contents
