Table of Contents
Advertisement
Quick Links
WINCH MODELS:
35STS12-CAD, 35STA12-CAD
45STS12-CAD, 45STA12-CAD
SAVE THESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do so could result in
serious injury. Specifications, descriptions and images in this manual are as accurate as known at the time of publication, but are subject to change without notice.
WINCH
OWNERS MANUAL
ENGLISH
Doc-rev 20230912
Advertisement
Table of Contents
Related Manuals for Stealth 35STS12-CAD
Summary of Contents for Stealth 35STS12-CAD
- Page 1 WINCH OWNERS MANUAL WINCH MODELS: ENGLISH 35STS12-CAD, 35STA12-CAD 45STS12-CAD, 45STA12-CAD Doc-rev 20230912 SAVE THESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure to do so could result in serious injury. Specifications, descriptions and images in this manual are as accurate as known at the time of publication, but are subject to change without notice.
-
Page 2: Getting To Know Your Winch
INTRODUCTION WINCH MANUAL GETTING TO KNOW YOUR WINCH INTRODUCTION Congratulations on your purchase of a winch. We design and build Your winch is a powerful piece of machinery. It is important that you winches to strict specifications and with proper use and maintenance your understand the basics of its operation and specifications so that winch should bring you years of satisfying service. -
Page 3: Important Safety Instructions
WINCH MANUAL INTRODUCTION IMPORTANT SAFETY INSTRUCTIONS DANGER DANGER When re-spooling the cable Ensure that the cable spools in the under-wind position with the cable entering the drum from the DO NOT EXCEED RATED CAPACITY. bottom, not the top. To re-spool correctly, and while wearing gloves, keep a slight tension on the cable while pushing the remote control button to draw in the cable. - Page 4 INTRODUCTION WINCH MANUAL NOTICE WARNING The vehicle engine should always be kept running during winching Keep children away. Children must never be allowed in the work area, operation to minimize battery drain and maximize power and speed Do not let them handle machines, tools, extension cords or operate of the winch.
- Page 5 WINCH MANUAL INTRODUCTION WARNING CAUTION Do not operate tool if under the influence of alcohol or drugs. Always re-spool cable neatly after any operation this will avoid any Read warning labels on prescription to determine if your judgment or winch cable misalignment for the next use reflexes are impaired while taking drugs.
-
Page 6: Winch Assembly And Mounting
WINCH MANUAL WINCH ASSEMBLY AND MOUNTING WINCH ASSEMBLY AND MOUNTING CAUTION Batteries contain gases which are flammable and explosive. Wear eye protection during installation and remove all jewelry. Do not lean over battery while making connections. 5. Assemble the Clevis Hook to the cable. Take off the pin from the Clevis Hook, connect the Clevis Hook to the cable and mount the pin back to the Clevis Hook. -
Page 7: Winching Techniques A-Z
WINCHING TECHNIQUES A-Z WINCH MANUAL NOTICE WINCHING TECHNIQUES A-Z Short pulls from an angle can be used to straighten the vehicle/ equipment. Long pulls should be done with the wire rope in a a. Take time to asses your situation and plan your pull. straight line to winch/vehicle, see above illustration b. -
Page 8: Maintenance
WINCH MANUAL MAINTENANCE t. Release the tension on the wire rope. The winch is NOT designed as securing device and should NEVER hold a load or secure whilst in transport, winch cable MUST be released when equipment or vehicle is secure. -
Page 9: Troubleshooting
WINCH MANUAL TROUBLESHOOTING TROUBLESHOOTING Problem Cause Solution Remote assembly not connected properly Check remote lead and connections. Loose battery cable connections Check battery and connections. Defective remote assembly Replace remote lead assembly. Motor does not turn on Check for voltage at armature port with Switch Defective motor pressed. -
Page 10: Specifications
WINCH MANUAL SPECIFICATIONS SPECIFICATIONS 35STS12-CAD / 35STA12-CAD Rated line pull 3500 lbs (1588 kgs) Gear reduction ratio 170:1 Motor 12V: Input: 2.4kW / 3.2hp; Output: 1.0 kW / 1.3hp Overall dimensions 13.2”×4.6”×4.4” 335mm×116mm×112mm Drum size Ø 1.46”×3.15” (Ø 37mm×80 mm) - Page 11 SPECIFICATIONS WINCH MANUAL SPECIFICATIONS 45STS12-CAD / 45STA12-CAD Rated line pull 4500 lbs (2041 kgs) Gear reduction ratio 166:1 Motor 12V: Input: 2.5kW / 3.4hp; Output: 1.1 kW / 1.4hp Overall dimensions 16.1”×4.92”×4.8” 408mm ×125mm ×123mm Drum size Ø 2.0”×4.9” (Ø 50.4mm×125mm) 45STA 45STS Cable...
-
Page 12: Winch Assembly Drawing
SPECIFICATIONS WINCH MANUAL WINCH ASSEMBLY DRAWING 35STS12-CAD / 35STA12-CAD... -
Page 13: Winch Parts List
WINCH MANUAL SPECIFICATIONS WINCH PARTS LIST 35STS12 / 35STA12 Description Description P0350100 Motor Assembly P0350031 Mounting Channel P0350001 Cap Screw M8 x 16 P0350032 Cap Screw M8 x 20 P0350002 Transition Shaft P0350033 Cap Screw M8 x35 P0350004 Tie Bar P0350034 Terminal Protector P0350004... - Page 14 SPECIFICATIONS WINCH MANUAL WINCH ASSEMBLY DRAWING 45STS12-CAD / 45STA12-CAD...
- Page 15 WINCH MANUAL SPECIFICATIONS WINCH PARTS LIST 45STS12 / 45STA12 Description Description P0450001 Terminal Protector P0450027 Thick Flat Washer Ø8 P0450100 Motor Assembly P0450028 Locking Washer Ø8 P0450002 Screw M4 x16 P0450029 Screw M8 x25 P0450003 Locking Washer Ø4 P0450800 Cable Assembly P0450004 Stand Bar P0450031...
- Page 16 For warranty and repair enquiries, please contact the retailer where you purchased your winch product.