Page 3
ELECTRICAL REQUIREMENTS Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity.
Attention: Keep the packaging material (plastic INTRODUCTION bags, expanded polystyrene) out of the reach of Thank you for choosing this De’Longhi Coffee machine. We children. hope you enjoy your new appliance. Please take a few minutes to read these instructions. Attention: The appliance is not intended for use by This is the only way to ensure optimum results and persons (including children) with reduced physical,...
DESCRIPTION socket with a minimum rating of 10A and correctly 1. Control panel earthed. 2. Steam knob 3. Water tank the plug on the appliance, have the plug replaced by a 4. Water tank lid qualified technician. 5. Power supply cable 6.
4. Empty the cup, wait for the “OK” light to switch on 8. To remove the used coffee, lock the filter using the again and repeat the same operation again. lever in the grip and let the coffee fall out by knocking the over-turned filter-holder (fig.
reached the ideal temperature for the production of clockwise and pulling it downwards (fig. 19). steam. 7. Dip the cappuccino maker into the milk a few downwards (fig. 20). millimeters (fig. 17) making sure not to immerse the 4. Wash the cappuccino maker and steam nozzle raised line on the cappuccino maker (indicated by thoroughly in warm water.
the filter (fig. 26), making sure that the pin is inserted 2. Press the on/off button and wait for the OK light to into the hole of the support itself (see arrow fig. 26). switch on. position a suitable container under the machine outlet.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTION Espresso coffee does not flow No water in the tank Fill the water tank The holes in the filter-holder are blocked Clean the holes in the filter-holder spouts The espresso boiler outlet is blocked Clean as indicated in the “Cleaning the boiler outlet” paragraph Espresso coffee drips from the The filter-holder is inserted incorrectly...
Need help?
Do you have a question about the Icona and is the answer not in the manual?
Questions and answers