ImaCor Zura Handheld Quick Reference Manual

Power on Zura Handheld:
1. To turn on, HOLD DOWN "Power" button on grip.
2. TAP "Clarius" app icon on the tablet.
3. TAP "Select Scanner".
4. TAP Handheld scanner with Battery and Wi-Fi icons.
5. Wait for scanner Wi-Fi to connect to tablet
(approximately 10 seconds).
Connect ClariTEE® Probe:
1. CONNECT ClariTEE probe to Handheld.
2. Probe serial number and timer will appear on screen.
3. If first time connecting: ENTER Patient Name and info,
or tap "DICOM Worklist" to scan info in patient wrist ID.
If previously connected: Patient info will self-populate.
4. TAP "Scan" to start imaging.
5. INSERT probe and position to obtain desired image.
Image with the Zura Handheld:
1. SWIPE UP/DOWN to adjust the Depth.
2. SWIPE LEFT/RIGHT for Gain. Make fine adjustments to
the top, middle or bottom of image using bars on screen.
3. TAP the "Auto" icon on the image left for Auto Gain.
4. To save cineloops, TAP the "Film Reel" on the bottom
right of the screen, or PRESS the "Capture" button on the
handle with your pointer finger.
Zura Handheld™ Quick Reference Guide