Advertisement
5) In the dropdown list, select the target fingerprint recorder type.
6) Click Save button to save the settings.
7) (Optional) You can click Restore Default Value button to restore the
default settings.
9. Start Recording.
1) In the Fingerprint tab, click Start button, click to select the fingerprint
and start collecting.
2) Lift and rest the corresponding fingerprint on the fingerprint scanner
for two times to collect the fingerprint picture to the client.
Note:
If the collected fingerprint picture is not clear, you should try
the third time to collect the fingerprint picture.
3) Click OK to save the fingerprint picture.
2.2 Fingerprint Collection Method
The place of finger affects the fingerprint information collected a lot
because of the area sensor used in the fingerprint reader. The following
are some tips for fingerprint collection.
Placement of Finger
Try to place the finger in the center of the sensor. If the fingerprint stored
in the template is left skewed when collection, and then the user press his
finger too right when identification, the identification will be failed,
Fingerprint Recorder·User Manual
Select Fingerprint Window
6
Advertisement
