Page 2
GENERAL INTRODUCTION The following considerations have as purpose to guarantee a correct reception and use the apparatus, as well as the security of the user. We recommend to read this manual detailedly before proceeding to unpack the apparatus and later use. -This manual should be conserved permanently within reach of the user.
Page 3
To press the key "Set" of the Temperature Controller D-85. The display indicate the message SP and next the display will visualize the temperature to maintain (set point temperature), adjusted to 0ºC in factory To introduce the set point temperature you press the key ⇑ to increase or ⇓ to decrease temperature. These keys allow the numeric variation of a digit, but if stays pressed 2 seconds the value will vary quickly.
Page 4
Note Disposal of Waste Electrical and Electronic Equipment by users in private households in the the European Union. This symbol on the product or on the packing indicates that this can not be disposed of as household waste. You must dispose of your waste equipment by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment.
Page 5
“CE” DECLARATION OF CONFORMITY Reg.OF1086 de 2-01-1997 DINTER S. A. DINKO Instruments c/ Encarnación, 123-125 / 08024 – Barcelona Declare that the products mentioned in attached list, to which this declaration relates, conform with the essential safety requirements of the relevant European Directive: - Low Voltage Directive 73/23/EEC of 19/02/73 modified by Directive 93/68/EEC of 22/07/93.
Need help?
Do you have a question about the Dinko D-13CEM and is the answer not in the manual?
Questions and answers