Related Manuals for Eizo TRM0000
Summary of Contents for Eizo TRM0000
- Page 1 Installation manual TRM0000 Input modules for modular LCD monitors Important Please read the safety information and all information delivered with the product carefully to familiarize yourself with safe and effective usage.
-
Page 2: Legal Information
Use of EIZO products WARNING EIZO products may only be used for the applications described in the catalog and in the relevant tech- nical documentation. If products and components from other manufacturers are used, these must be recommended or approved by EIZO. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. -
Page 3: Table Of Contents
Scope of delivery ...................... 7 4 Setup and installation ...................... 8 Removing and installing the input module .............. 8 5 Connecting........................ 12 TRM0000-DVI input module ................... 12 TRM0000-M12 input module .................. 13 TRM0000-TDL input module .................. 14 5.3.1 Installing the EMC pad on the signal cable .......... 14 TRM0000-3GS Input Module.................. 16... - Page 4 Table of contents 13 Appendix ......................... 28 13.1 Guidelines and manufacturer's declaration – electromagnetic emissions .... 28 13.2 Markings and symbols .................... 28 13.3 Environmental protection .................. 28 13.4 Additional devices.................... 28 13.5 Contact ........................ 28 13.6 Trademarks...................... 29 TRM0000 Installation manual, 04/2021...
-
Page 5: Introduction
1 Introduction 1.1 Contents of this document This document presents the installation and replacement of the TRM0000 input module. To ensure clarity, it does not contain all detailed information on this product. Follow the instructions for use of the compatible monitor, for example the RadiForce EX271W. -
Page 6: Safety Information
2 Safety information 2.1 General safety instructions Correct and safe operation of EIZO devices assume professional transport, storage, installa- tion, and connection, as well as careful operation and service. Follow the general safety instructions in the instructions for use of the compatible monitor, for example the RadiForce EX271W. -
Page 7: Description
After unpacking, check the scope of delivery for correctness and complete- ness. Note Keep the input module packaging material for subsequent use. Input module TRM0000 input modules are installed in modular EIZO LCD monitors and enable the connection of various video input signals. Product Order number Description... -
Page 8: Setup And Installation
CAUTION CE Konformität The RadiForce EX271W monitor is CE compliant only when a TRM0000 input module manufactured and approved by EIZO is properly installed. NOTICE Ensuring the signal chain After installing or replacing an input module, follow all country-specific regulations regard- ing the acceptance and verification of imaging systems. - Page 9 4.1 Removing and installing the input module Monitor Input module Fig.: Monitor with the TRM0000-DVI input module The following sections describe how to remove and install the input module. Removing the input module To remove the input module, proceed as follows: 1.
- Page 10 Type Countersunk screw, ISO 14581 M3 x 5 – 8.8 Maximum torque permitted on the monitor 1.3 Nm module compartment To install the input module, proceed as follows: 1. Remove the input module from the packaging. TRM0000 Installation manual, 04/2021...
- Page 11 Observe the connection and start-up information in the monitor's respective instructions for use. 1. Connect the monitor to a video source. 2. Ensure that the operation LED lights green and the monitor displays the expected im- age. TRM0000 Installation manual, 04/2021...
-
Page 12: Connecting
Follow the safety information and the connection procedure descriptions in the RadiForce EX271W monitor instructions for use. 5.1 TRM0000-DVI input module Using the TRM0000-DVI, the monitor can display digital DVI input signals from a DVI cable. ① DVI input ②... -
Page 13: Trm0000-M12 Input Module
5.2 TRM0000-M12 input module 5.2 TRM0000-M12 input module With the TRM0000-M12, the monitor can process digital DVI input signals via EIZO DVI transmission links (TDL) using the integrated TDL receiver. The TRM0000-M12 offers the highest IP protection of all input modules. -
Page 14: Trm0000-Tdl Input Module
5.3.1 Installing the EMC pad on the signal cable The TRM0000-TDL input module is delivered with an EMC pad and holding plate. The fol- lowing describes how to install the EMC pad on the signal cable to be connected. - Page 15 Support plate EMC pad 2. Insert this combination into the TRM0000-TDL input module until the safety catch in the base of the RJ45 locks in. Fig.: Installed EMC pad and holding plate on the TRM0000-TDL input module Note If the RJ45 connector does not lock in, install the EMC pad without the holding plate.
-
Page 16: Trm0000-3Gs Input Module
Connecting 5.4 TRM0000-3GS Input Module 5.4 TRM0000-3GS Input Module The monitor can process digital 3G-SDI input signals with the TRM0000-3GS. TRM0000-3GS Input Module 6GF6051-0AA03 (P) P/N: (S) Serial No: HXF5001003 (2P) Revision: 01 IP 54 ① 3G-SDI output ② 3G-SDI input ③... -
Page 17: Trm0000-Hdl Input Module
5.5 TRM0000-HDL Input Module 5.5 TRM0000-HDL Input Module With the TRM0000-HDL, the monitor can process digital DVI input signals via EIZO HDL transmission links using the integrated HDL receiver. HDL signals are so-called high definition video link signals which are converted from DVI signals by the EIZO splitter and converter TID0102-HDL, for example. -
Page 18: Commissioning
Commissioning 5.5 TRM0000-HDL Input Module 6 Commissioning Input modules that are installed correctly are detected by the monitor automatically, meaning that no additional start-up measures are necessary. Observe the information in the monitor's instructions for use. TRM0000 Installation manual, 04/2021... -
Page 19: Operation
Operation 5.5 TRM0000-HDL Input Module 7 Operation Input modules that are installed correctly are detected by the monitor automatically and are not operated independently. Observe the information in the monitor's instructions for use. TRM0000 Installation manual, 04/2021... -
Page 20: Cleaning And Maintenance
• Input modules may only be cleaned when installed. • Observe the cleaning information in the monitor's instructions for use. 8.2 Maintenance The input modules are maintenance free. Observe the information in the monitor's instructions for use. TRM0000 Installation manual, 04/2021... -
Page 21: Troubleshooting
Operation LED Cause Remedy Yellow No input signal. Check the input module ribbon cable connector. Dark No power supply. Check the input module multi-wire voltage cable connector. TRM0000 Installation manual, 04/2021... -
Page 22: Technical Specifications
RJ45 socket, 1920 x 1080 at 50 - 70 Hz • Service and communication using the DDC channel 10.2 Mechanical design Housing components Metal and plastic Ventilation openings None TRM0000-DVI input module • Degree of protection • IP42 according to EN 60529 • Weight • 0.15 kg •... -
Page 23: Safety Regulations
Dimensions (W x H x D) in mm • 115 x 115 x 32 10.3 Safety regulations CAUTION CE Konformität The RadiForce EX271W monitor is CE compliant only when a TRM0000 input module manufactured and approved by EIZO is properly installed. Safety regulations Safety standards • IEC 60601-1 •... -
Page 24: Dimension Drawings
Dimension drawings 11.1 View from front and side 11 Dimension drawings All dimensions in mm 11.1 View from front and side Fig.: Dimension drawing of TRM0000-DVI input module TRM0000 Installation manual, 04/2021... - Page 25 Dimension drawings 11.1 View from front and side Fig.: Dimension drawing of TRM0000-TDL input module Fig.: Dimension drawing of TRM0000-M12 input module TRM0000 Installation manual, 04/2021...
- Page 26 Dimension drawings 11.1 View from front and side Fig.: Dimension drawing of TRM0000-3GS input module Fig.: Dimension drawing of TRM0000-HDL input module TRM0000 Installation manual, 04/2021...
-
Page 27: Spare Parts / Accessories
11.1 View from front and side 12 Spare parts / accessories The TRM0000 input modules are connected to the video sources using various cables and adapters. Check the information on spare parts and accessories in the monitor instructions for use, or contact your EIZO partner for information on available accessories. - Page 28 The device is in compliance with directive 2011/65/EU for limiting the use of specific hazardous materials in electric and electronic devices. 13.4 Additional devices Connected devices must meet the relevant safety standards. 13.5 Contact Support during installation and for technical questions www.eizo-or.com TRM0000 Installation manual, 04/2021...
- Page 29 13.6 Trademarks 13.6 Trademarks The EIZO Logo is a registered trademark of EIZO Corporation in Japan and other countries. EIZO is a registered trademark of EIZO Corporation in Japan and other countries. RadiForce is a registered trademark of EIZO Corporation in Japan and other countries.
- Page 30 Carl-Benz-Straße 3 76761 Rülzheim Germany Installation manual, 04/2021 TRM0000 1057581-004 Copyright © 2021 EIZO GmbH. All rights reserved.