hushoffice hushfree.M HUS-AP-002 Maintenance And Safety Manual

MAINTENANCE AND SAFETY RULES
hushfree.M
1

GLASS ELEMENTS

Once a week, clean the surface in circular
motions using a damp cloth. If you use a clean-
er, apply it first to the cloth and then clean the
surface. To clean glass elements, use chemi-
cals products specifically adapted for glass and
mirrors cleaning.
2

CASE AND FLAT SURFACES

Once a week, clean the surface from top to
bottom with a damp microfibre cloth that does
not leave fibres and prevent streaks. If any liquid
is spilled on the furniture, wipe it immediately
before it dries. Do not use products containing
abrasive agents, such as powders, pastes and
cream cleaners which can scratch the surface.
Do not use rough sponges.
3

VENTILATION SYSTEM

Once every six months, clean the fan with a
vacuum cleaner equipped with a flexible nozzle.
Do not insert the vacuum hose between
the fan blades.
4

TABLE TOP (OPTIONAL)

Clean regularly the entire surface with a microfi-
bre cloth soaked in the cleaner or water. Let it
dry. Do not apply the cleaner directly on the
surface.
Do not use abrasive or polishing products
and rough sponges
5
Floors
Once a week, vacuum the entire floor surface.
For heavy soiling, use a neutral cleaner. Use
products intended for floor coverings.
Before using the cleaner, test it on a small
invisible spot.
6

HANDLES

Clean everyday the handles inside and outside
the booth with a damp microfibre cloth. After
cleaning, wipe the handles dry.
Producent: Fabryka Mebli Biurowych Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska Producent: Fabryka Mebli Biurowych Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska
Dystrybutor: Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska Dystrybutor: Mikomax sp. z o.o. I 93-231 Łódź ul. Dostawcza 4, Polska
* HUS-AP-002
3
2
7

UPHOLSTERED ELEMENTS

Before cleaning, the upholstered element
should be cleaned using an electrostatic dust
brush or a hoover fitted with a soft brush.
Do not use solvents, chemical thinners or
pastes containing abrasive substances to re-
move dirt and stains from the fabric.
Any liquids spilt on the upholstery must be
removed immediately from the surface using
a cotton or paper cloth, so as not to spread the
liquid too thinly over the surface.
8

PLASTIC COMPONENTS

Once a week, clean the surface from top to bot-
tom with a damp microfibre cloth. The use of
solvent-based products may damage the sur-
face. Do not use products containing abrasive
agents, such as powders, pastes and cream
cleaners which can scratch the surface.
Do not use rough sponges.
1
6 10
8
4
5 9
9 POWDER-COATED ALUMINIUM
COMPONENTS
Do not use solvent-based detergents. Do not
Use preparations containing abrasive agents
such as powders, pastes or cleaning milks
which may scratch the surface. Do not use
rough sponges.
10

RESERVATION SCREEN

Once a week, clean the surfaces from top to
bottom with a damp microfibre cloth. The use
of solvent-based substances may damage the
surface. Do not use preparations containing
abrasive agents such as powders, pastes and
cleaning milks, which can scratch the surface.
Do not use aggressive cleaning products.
11
SIGNAL INDICATING
THAT THE BOOTH IS OCCUPIED
Once every six months, clean the fan using
a hoover with a soft nozzle.
11
7
hushoffice.com hushoffice.com