Summary of Contents for Goodway APS-1000
- Page 1 APS-1000 Ionizing Air Purifier Operating and Maintenance Instructions Read before operating.
-
Page 2: Table Of Contents
NOTES ..............................17 Thank you for purchasing Goodway's APS-1000 Air Purifying System. We appreciate your business and look forward to serving you in the future. As with all Goodway products, you can be assured that the finest quality components and workmanship have gone into this machine. -
Page 3: Important Safety Instructions
Do not use the unit if it does not operate properly or has been damaged. Do not try to service the unit yourself - call Goodway for assistance. Service must be performed only by qualified repair personnel. Service performed by unqualified personnel could result in a risk of injury and voids the warranty. -
Page 4: Product Overview And Diagram
It relies on multiple-filter technology to provide you with healthy, clean air. Remote Control (APS-REMOTE) HEPA Composite Filter HEPA Composite Filter Rear Cover Front Cover (APF-H13) (APF-H13) Pre-Filter Pre-Filter (APF-PF) (APF-PF) Main Body * Note APS-CSTR (Replacement Wheel Set) not shown APS-1000 0221... -
Page 5: Push Button Display Panel
Lower Display Screen The upper display screen includes push-buttons for power and other function controls, as well as information displays for consumption status and operating status. PACKAGE INCLUDES Machine Body Pre-filter HEPA Composite Filter Product User Manual Remote Control APS-1000 0221... -
Page 6: Product Position And Location Requirements
Purifies the air by eliminating smog, dust particles, formaldehyde, and other gaseous pollutants. • Produces large quantities of anions to improve air quality and optimize living environments. • Disinfects and purifies large volumes of air in homes, offices, restaurants, bars, and entertainment venues. APS-1000 0221... -
Page 7: Product Features
Power button will turn green when the start-up process has completed. The machine will enter its Automatic mode by default. The ‘AUTO’ (Automatic mode) icon on the front display panel will light up green. APS-1000 0221... - Page 8 After an adjustment is made by the user, the electric motor will no longer receive controls from the machine’s sensors, and will continue to operate at its current setting.v Fan Speed display, with a total of 5 different speeds APS-1000 0221...
-
Page 9: Pm Value Equivalency Table
Wi-Fi while in its Idle state. PM VALUE EQUIVALENCY TABLE PM1.0 Density 5-35 35-75 76-150 151-500 ug/m3 Air Quality (Green) Good (Blue) Normal (Orange) Poor (Red) Dirty Fan Speed Silent Medium High Maximum Speed Fan Speed Light Indicator APS-1000 0221... -
Page 10: General Maintenance And Storage
HEPA Composite Filter: Made from HEPA, adsorptive material, catalytic material, and filter material, this multi-functional composite filter can effectively purify the air by removing floating particulates, viruses, and bacteria, and by eliminating odors and harmful gases. APS-1000 0221... - Page 11 (in order to prevent damage, do not bend the filter during the cleaning process). Using a vacuum cleaner to remove dust Cleaning with water at the faucet APS-1000 0221...
- Page 12 Following the filter replacement reminders on the display panel, remove the dirty HEPA composite filter from the machine and insert the new filter in its place, then reinstall all filter components into the main body. Pre-filter Front Cover HEPA Composite Filter APS-1000 0221...
- Page 13 Finally, disconnect from the power source and install the rear cover onto the main body of the machine. After removing the protective cover, use a cotton Use a vacuum cleaner or swab to lightly wipe the sensor lens hairdryer to clean the air quality sensor cover APS-1000 0221...
- Page 14 First remove the air outlet screen, and use a cotton swab to clean the anion emitter by inserting it into the top of the iron mesh and moving from left to right to clean off dust. The anion generator must be cleaned at regular intervals. APS-1000 0221...
-
Page 15: Troubleshooting
This indicates that the HEPA composite filter has reached is continuously lit the end of its useful life as programmed within the machine settings; after replacing the filter, press and hold the Filter button to complete a time reset. APS-1000 0221... -
Page 16: Performance Specifications
600 ~ 1000ft² (56 ~ 96m²) Operating Method Intelligent purification Generated Anion Density 610,000/in³ 10,000,000/cm³ Voltage Rating AC 115V/60Hz AC 220V/50Hz Power Rating Idle Power Consumption ≤ 2W Power Cord Length 6.5ft (2m) Product Dimensions (LxWxH) 15.8x15.8x26.3in (40x40x66.9cm) Net Weight 14.0kg (31lb) APS-1000 0221... -
Page 17: Notes
NOTES APS-1000 0221... - Page 18 Visit: www.goodway.com P/N: MNL-APS-1000 ©Copyright 2021 Goodway Technologies Corp., Stamford, CT USA Effective date February 16, 2021 Goodway is a Trademark of Crossford International. Goodway reserves the right to improve products; contact the factory for the latest configuration and uses.
Need help?
Do you have a question about the APS-1000 and is the answer not in the manual?
Questions and answers