IFBlue IFBR1C-941 Quick Start Manual

IFBlue IFBR1C-941 Quick Start Manual

Uhf multi-frequency belt-pack ifb receiver
Hide thumbs Also See for IFBR1C-941:

Advertisement

Quick Links

Q
uick
S
tart
G
uide
IFBR1C
UHF Multi-Frequency Belt-Pack IFB Receiver
IFBR1C, IFBR1C-941, IFBR1C-VHF
Fill in for your records:
Serial Number:
Purchase Date:
This guide is intended to assist with
initial setup and operation of your
IFBR1C product.
For a detailed user manual, down-
load the most current
version at:
www.IFBlue.com
8 July 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IFBR1C-941 and is the answer not in the manual?

Questions and answers

Summary of Contents for IFBlue IFBR1C-941

  • Page 1 IFBR1C UHF Multi-Frequency Belt-Pack IFB Receiver IFBR1C, IFBR1C-941, IFBR1C-VHF Fill in for your records: This guide is intended to assist with initial setup and operation of your Serial Number: IFBR1C product. For a detailed user manual, down-...
  • Page 2: On/Off And Volume Knob

    The cord length is not critical but must be at least 6 inches minimum. USB Port Firmware updates via IFBlue Updater Utility are made easy with the USB port in the battery compartment. IFBR1C...
  • Page 3: Installing The Batteries

    The UP and DOWN arrow buttons adjust the Frequency in 25 kHz steps (VHF: 175 kHz steps). NOTE: Holding down the UP or DOWN arrow button, as opposed to a quick press, will scroll through the frequency steps at an accelerated pace. www.IFBlue.com...
  • Page 4: Preset Selection

    Preset Selection Press the PRESET button to access the Preset page. Presets are displayed P on the left and the current preset number (1-10) on the right OR If the current preset slot is empty, an E also appears on the right. Use the UP and DOWN arrow buttons to navigate among any programmed presets, tuning the receiver to each.
  • Page 5: Setup Pages

    Lithium or Alkaline. Any attempt to recharge Lithium or Alkaline batteries can lead to damaging both the unit and the batteries. To recharge NiMH batteries, use the IFBlue CHSIFBR1C charger (see page 7), which can charge four IFBR1C units simultaneously. Backlight Settings Press the PRESET button while powering on the receiver.
  • Page 6: Firmware Update Instructions

    USB cable. The cable must have a micro-B male connector to mate with the USB jack in the IFBlR1C. 2) Turn the IFBR1C on. Use the IFBlue Firmware Update Wizard to open the firmware file and install the new firmware version.
  • Page 7 Accessories CHSIFBR1C IFBlue Receiver battery charging station; up to four units can be charged at once. Includes DCR5/9AU power supply and AC power cord appropriate for region. DCR5/9AU Replacement power supply for the charging station. Includes AC power cord appropriate for region.
  • Page 8: Limited One-Year Warranty

    LIMITED ONE YEAR WARRANTY The equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was purchased from an authorized dealer. This warranty does not cover equipment which has been abused or damaged by careless handling or shipping.

This manual is also suitable for:

Ifbr1cIfbr1c-vhfIfbr1c-b1Ifbr1c-a1

Table of Contents