Table of Contents Pairing Your Plant Monitor Understanding the Plant Monitor LED Resetting the Plant Monitor Finding Your Plant Monitor Serial Number Linking/Unlinking & Transferring Plants Charging & Battery Safety & Certifications...
Pairing Your Plant Monitor Turn on your plant monitor by pressing/squeezing the device with your thumb(s) placed on the circle on top of the logo. Flashing LED There is a button behind the housing that you will need to make contact with.
Page 4
"Device." 4. Click on the "Scan/Bluetooth" button. At this time please ensure your Plant Monitor is showing a flashing orange light. If not, please turn on your device or charge it if needed.
Page 5
The application should automatically populate the WiFi SSID that your smartphone is connected to. If it doesn't or you are connecting your plant monitor to a different router, please enter your SSID manually with case sensitivity in mind. 7. If you enter your SSID and Password correctly, you will receive a success message on the app and see the orange light on the device cease to flash.
If your device turns itself off due to a timeout when the internet connection is interrupted or if the battery has died, the EarthOne Grow application will notify you. You will know your device is turned back on when you press the ON button if you see the Orange Light come on briefly and turn off signifying that a data packet has been sent.
Resetting Your Plant Monitor You may need to reset your plant device when switching to another WiFi network, or for another reason. Resetting your Plant Monitor will erase current WiFi credentials. To reset your Plant Monitor: 1.Turn Off the Device by Pressing/Squeezing the Button on the Housing.
1.In order to see what device corresponds to what serial number, please reset the device in question following the "Resetting your Plant Monitor" instructions. 2. Once reset, follow the instructions from "Pairing Your Plant Monitor." In this part of the process during the scan, your device will appear on the mobile application along with its serial number.
Linking/Unlinking & Transferring Plants To get the most value out of EarthOne Plant Monitors, it is strongly recommended to use one plant monitor per plant. In order to collect plant health metrics for a specific plant, you must link the Plant Monitor to the plant.
(5V, 1A) or from USB ports on computers. Example of Compatible Power Adapter. EarthOne Plant Monitors will not work with Fast Charging or High Wattage Power Adapters. You will know that this is the case if a RED/GREEN LED does not come on when connected to a charging cube.
Safety & Certifications The user should touch a grounded surface first before touching the unit. Touching conductive patches on the soil moisture sensor should be avoided as they are sensitive to Electro Static Discharge. Lead free electronics and components. The product, accessories and packaging should be sorted for environment-friendly recycling.