Download Print this page

UltrArmor UA3 N370 User Manual

Advertisement

Quick Links

UA3 N370 User Guide
Declaration of Conformity
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE
This device conforms to the 2014/30/EU- Electromagnetic Compatibility (EMC) directives to carry CE-marking.
RoHS and WEEE
This product fulfils the requirements of the EU directive 2011/65/EU on the Restriction of the Use of certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS) which aims to prevent the risks posed to human health and the environment related to the
management of electronic and electrical waste.
The WEEE symbol (Wheeled bin) on the product(s) and / or accompanying documents means that used electrical and electronic products
should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated
collection points. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human
health and the environment, which could otherwise arise from inappropriate waste handling.
Safety Instructions:
 Please keep equipment away from humidity.
 Disconnect the equipment from all AC outlets before cleaning. Use only a damp cloth for cleaning. Do not use liquid or sprayed detergent.
 There is the danger of an explosion if battery is incorrectly replaced. Replace only with the same or an equivalent type recommended by the
manufacturer.
Warning: This Product contains a Button or Coin Cell Battery. A swallowed Button or Coin Cell Battery can cause internal
chemical burn in as little as two hours and lead to death. Dispose of used batteries immediately. Keep new and used battery
away from children. If you think batteries might have been swallowed seek medical attention immediately.
 Permanent hearing damage may occur if play audio loudly on device while using.
 The openings on the enclosure are for air convection to protect the equipment from overheating. DO NOT COVER THE OPENINGS.
 Keep sufficient space for device for ventilation. Do not place the device in any place where the airflow is restricted to the device.
 Excessive sound pressure from earphone or headphone will cause hearing damage. Adjustment of the volume control as well as the equalizer to
settings other than the center position may increase the earphones or headphones output voltage and the sound pressure level.
 Use Only Power Supplies listed in the user guide.
 Place the power cord in such a way that people cannot step on it. Do not place anything over the power cord.
 Never pour liquid into an opening as this can cause fire or electrical shock.
 Never open the equipment. For safety reasons, only qualified service personnel should open the equipment.
 If one of the following situations arises, get the equipment checked by service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment does not work well, or you cannot get it to work according to the user's guide.
The equipment has been dropped and damaged.
The equipment has obvious signs of breakage.
 This device should only be used in environments with following conditions & configurations:
Vertical usage with foot stand @Temperature: 0~35
Mounting with VESA mounting kit @Temperature: 0~35
 You can find the additional safety instructions & information of UltrArmor UA series for RoHS, REACH, Electromagnetic Compatibility (EMC),
Ergonomics in website page: www.ultrarmor.com\support\document
Technical Support and Assistance
1. Contact your distributor or reseller for technical support if you need additional assistance.
2. Please have the following information ready before you call:
- Product name and serial number.
- Description of your peripheral attachments.
- Description of your software (operating system version, BIOS version, etc.).
- A complete description of the problem.
Please visit the UltrArmor website (www.ultrarmor.com) for the latest product certifications and compliance information.
o
C (32° to 95° F), Humidity: 20% to 80%, non-Condensing.
o
C (32° to 95° F), Humidity: 20% to 80%, non-Condensing.
1
Version 1.0

Advertisement

loading

Summary of Contents for UltrArmor UA3 N370

  • Page 1 Mounting with VESA mounting kit @Temperature: 0~35 C (32° to 95° F), Humidity: 20% to 80%, non-Condensing.  You can find the additional safety instructions & information of UltrArmor UA series for RoHS, REACH, Electromagnetic Compatibility (EMC), Ergonomics in website page: www.ultrarmor.com\support\document Technical Support and Assistance 1.
  • Page 2 External antenna hole ⑬ Kensington lock If USB-C DP is connected to a display monitor, DP3 is disabled. VESA Mounting Kit Assembly (Optional) Foot Stand Assembly Please visit the UltrArmor website (www.ultrarmor.com) for the latest product certifications and compliance information. Version 1.0...