Table of Contents
Advertisement
Available languages
Available languages
PRODUCT DESCRIPTION:
1. Heater dish
4. Function knob
2. Protection guard
5. Timer knob
3. Carrying handle
6. Tip-over switch (underside)
OPERATING INSTRUCTIONS:
1.
Place the heater on a stable and flat surface. Use the carrying handle 3 to move the heater
around. When the heater is not properly placed or tipped over, the tip-over switch 6 will be
activated. In this case, the heater will NOT operate.
2.
Turn the timer knob 5 to the ON position.
3.
Turn the function knob 4 to the OFF position.
4.
Connect the power cord to an electrical outlet.
WARNING: Be sure that the plug of the power cord fits tightly into the outlet!
5.
Turn the function knob to a desired setting. The heater will start operation.
Osc. High – High heat (800 W) with oscillation
(the heater dish 1 will swing from side to side)
High – High heat (800 W) without oscillation
Low – Low heat (400 W) without oscillation
Osc. Low – Low heat (400 W) with oscillation
6.
Gently tilt the heater dish forward or backward to adjust the operating angle.
7.
Turn the function knob to the OFF position to switch off the heater.
To completely disconnect from power, unplug the heater from the electrical outlet.
Timer
You can program the heater to operate for a specific period of time
(up to 60 minutes).
1. Turn the timer knob 5 to set it to the desired operating time.
Options: 10, 20, 30, 40, 50 and 60 minutes
2. Turn the function knob 4 to a desired setting. The heater will start operation for the selected
period of time. The heater will automatically turn off when the timer is up and the timer knob is
at the OFF position.
3. To stop using the timer function, turn the timer knob to the ON position.
When the timer knob is set at the ON position, the heater will operate continuously when the
function knob is set to one of the operation settings.
Overheat protection
This heater is equipped with an overheat safety feature. When the heater's internal components
reach a certain temperature that could cause overheat and possible fire, the heater will
automatically switch off. To operate the heater again, switch off the heater by setting the function
knob 4 to the OFF position and unplug the heater from the electrical outlet. Then allow the
heater to cool down to room temperature before using the heater again.
CLEANING/ MAINTENANCE INSTRUCTIONS:
WARNING: Risk of injury! Be sure that the heater is unplugged and has completely cooled down
before cleaning or storing the heater.
WARNING: Risk of damage! NEVER immerse the heater in water or any other liquid. NEVER use
abrasive cleaners and hard brushes to clean the heater.
1. Switch off the heater and unplug it from the electrical outlet.
2. Clean the housing with a soft, damp cloth.
3. Use a vacuum cleaner (with a brush attachment) to remove any dust accumulated on the
protection guard 2
4. If necessary, use a can of compressed air to remove any dust accumulated
on the heater dish 1
5. Let all parts thoroughly dry before next use or storing.
Storage
Thoroughly clean and dry all parts before storing.
• Store the heater in a clean and dry place.
• Keep the heater out of the reach of children.
SERVICE INSTRUCTIONS:
•
Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing
•
so will void the warranty.
•
If you have any questions regarding this unit's operation or believe any repair is necessary,
please call 1-888-672-5832 to speak with a Customer Service Representative.
•
If you need to exchange the unit, please return it, in its original carton with a sales receipt
enclosed, to the store you purchased it. If you are returning the unit more than 30 days after the
date of purchase, please see the enclosed warranty.
•
If you have any other question or comments, feel free to write us:
Optimus Enterprise, Inc.
2201 E. Winston Road, Unit J
Anaheim, CA 92806
E-mail: Service@optimusent.com
Advertisement
Table of Contents
