Advertisement
Quick Links
User's Manual
Chain hoist
64174, 64175
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Summary of Contents for XPOtool 64174
- Page 1 User’s Manual Chain hoist 64174, 64175 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
- Page 2 To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler – Germany E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 64174, 64175 Page 2 The Tool Experts 02 2023-1...
- Page 3 Reversing a load is forbidden under normal operation conditions; the lower block of the chain hoist is not designed for this purpose. If loads need to be reversed during normal operation, an anti-twist protection must be used or the producer asked. https://www.XPOtool.com Item 64174, 64175 Page 3 The Tool Experts 02 2023-1...
- Page 4 The attachment point for the chain hoist must be chosen so that the load bearing construction that it shall be attached to has sufficient stability and that the forces expected can be absorbed safely. https://www.XPOtool.com Item 64174, 64175 Page 4 The Tool Experts 02 2023-1...
- Page 5 Inspection, maintenance, and repair According to the national and international accident prevention and safety regulations, chain hoists must be checked: • in compliance with the risk assessment of the user, https://www.XPOtool.com Item 64174, 64175 Page 5 The Tool Experts 02 2023-1...
- Page 6 • Dirty chains are cleaned with petroleum or a similar cleaning agent. • Never heat the chain. • When lubricating the chain, also check its wear. https://www.XPOtool.com Item 64174, 64175 Page 6 The Tool Experts 02 2023-1...
- Page 7 Attach the loose end of the idler chain to the hoist in place of the old load chain. Attention! The loose end of the idler must always be attached to the chain stop (see illustration). https://www.XPOtool.com Item 64174, 64175 Page 7 The Tool Experts 02 2023-1...
- Page 8 If the device is to be used again after decommissioning, it must first be checked again by a qualified person. Disposal After decommissioning, recycle or dispose of the parts of the device in accordance with the legal regu- lations. https://www.XPOtool.com Item 64174, 64175 Page 8 The Tool Experts 02 2023-1...
- Page 9 Lower hook with safety lock Lower hook housing Hand wheel Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 64174, 64175 Page 9 The Tool Experts 02 2023-1...