Whirlpool 7MWTW1950EW Use And Care Manual page 23

7.
Select soil level
Once you select a cycle, select the soil level by turning the
Nivel de Suciedad (Soil Level) knob to the desired setting.
8.
Select Temperature
Once you select a cycle, select the desired wash temperature
by turning the Temperatura (Temperature) knob to the
appropriate setting based on your load. All rinses are cold.
Always read and follow fabric-care label instructions to avoid
damage to your garments.
Temperature
Caliente (Hot)
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Tibia (Warm)
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Semifría (Cool)
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cool is slightly warmer than Cold.
Fría (Cold)
This is the temperature from your
faucet. If your tap water is very
cold, warm water may be added to
assist in soil removal and to help
dissolve detergents.
Suggested Fabrics
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
9.
Select cycle options, if desired
If you would like to add an Enjuague Adicional (Extra Rinse)
to most cycles or use the Llenado Profuno (Deep Fill) option,
turn the appropriate knob to Sí (On).
10.
Press INICIO/PAUSA (START/
PAUSE) to begin wash cycle
Close the Lid. Press the Inicio/Pausa (Start/Pause) button to
start the wash cycle. When the cycle has finished, the Listo
(Done) indicator will light. Promptly remove garments after
cycle has completed to avoid odor, reduce wrinkling, and
prevent rusting of metal hooks, zippers, and snaps.
Unlocking the Lid to Add Garments
If you need to open the lid to add 1 or 2 missed garments:
Press Inicio/Pausa (Start/Pause). The lid will unlock once
washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Add
garments, close lid, and press Inicio/Pausa (Start/Pause)
again to restart the cycle.
If lid is left open for more than 10 minutes, the water will
pump out automatically.
23