Traeger TFB38TCA Owner's Manual page 14

HOPPER CLEANOUT SYSTEM
This model barbeque has a hopper cleanout system which gives you the advantage of
being able to change from one flavor of pellets to another quickly and without mess.
Below are instructions on how to use this feature.
WARNING! Unplug the barbeque from the power source before using the cleanout
system.
Hopper cleanout process:
1) Place a container large enough to hold the discharged pellets (16lbs when full)
under the hopper cleanout located on the back of the hopper. (see Figure 4-4)
2) Unscrew the fastener located on the door of the hopper cleanout and lift the door
to open allowing the pellets to fall into the container below. (see Figure 4-3)
3) You will need to use a spatula or a spoon to push the last few pellets out through
the door.
4) Then close the door and screw the fastener back into the hopper and refill with
another flavor of Traeger Wood Pellets.
5) Plug the barbeque back in and follow the initial startup instructions in this
manual.
Figure 4-3 Figure 4-4