Table of Contents
Advertisement
Quick Links
True Manufacturing Co., Inc.
THAC-36-HC-LD
Be sure to read and fully understand
before installing, operating, maintaining or servicing
this appliance. Failure to do so can result in appliance
failure, property damage, serious injury or death.
Appliance failure, injury or property damage due to
improper installation is not covered by warranty.
True Manufacturing Co., Inc.
2001 East Terra Lane • O'Fallon, Missouri 63366-4434
(636) 240-2400 • FAX: (636)-272-2408
International FAX: (636)-272-7546 • (800)-325-6152
Parts Department: (800)-424-TRUE (424-8783)
Parts Department FAX: (636)-272-9471
North America – Canada and Caribbean
Warranty Phone +1 855-878-9277
Warranty Fax +1 636-980-8510
Warranty Email warrantyinquiries@truemfg.com
Technical Phone +1 855-372-1368
Technical Email service@truemfg.com
7:00 am–6:00 pm CST Monday–Friday,
8:00 am–12:00 pm Saturday
TEC_TM_087 | REV. B |EN
WARNING!
this document
Mexico
Phone +52 555-804-6343/44
service-mexicocity@truemfg.com
9:00 am–5:30 pm M–F
Latin America
Phone: +52 555-804-6343/44
servicelatam@truemfg.com
9:00 am–5:30 pm M–F
INSTALLATION MANUAL
HORIZONTAL AIR CURTAIN
THAC-60-HC-LD
TRUE tracks the history of your appliance
For easy reference, record your appliances full model name and
serial number below. This information is on your serial label.
Serial label location varies by appliance.
Model Name:
Serial Number:
INSTALLATION MANUAL
HORIZONTAL AIR CURTAIN
UK, Ireland, Middle East,
Africa & India
Phone: +44 (0) 800-783-2049
Service-emea@truemfg.com
8:30 am–5:00 pm M–F
Australia
Phone: +61 2-9618-9999
service-aus@truemfg.com
8:30 am–5:00 pm M–F
12/11/2023
USER ACTION!
by its serial number.
Original Instructions
European Union & Commonwealth
of Independent States
Phone: +41 61 563 0705
service-emea@truemfg.com
8:00 am–5:00 pm M–F
975544-B
Advertisement
Table of Contents
Related Manuals for True THAC-36-HC-LD
Summary of Contents for True THAC-36-HC-LD
- Page 1 USER ACTION! WARNING! this document Be sure to read and fully understand TRUE tracks the history of your appliance by its serial number. before installing, operating, maintaining or servicing For easy reference, record your appliances full model name and this appliance. Failure to do so can result in appliance serial number below.
-
Page 2: Table Of Contents
F O R YO U R PU R C H A S E Congratulations! The primary purpose of this document is to assist the installation, maintenance, and servicing of your TRUE appliance. This document contains information important to safety, operation, maintenance, and servicing. DO NOT discard this document. -
Page 3: Preface
The warning, guidelines, and recommendations within this document are meant to prevent appliance damage, injury, or death. Please carefully read all warnings, guidelines, and recommendations before proceeding to ensure the continued safe use and maintenance of your TRUE appliance. Signal & Symbol Definitions Below are symbols you may see in this document. -
Page 4: Important Safety Information
HORIZONTAL AIR CURTAIN truemfg.com Important Safety Information Important Safety Information Basic Safety & Operation Warnings Follow basic safety precautions, including the following, to reduce risk of personal injury, electric shock, fire, or death. WARNING! Be sure to read and fully understand this document before installing, operating, maintaining, or servicing this appliance. Failure to do so can result in appliance failure, property damage, serious injury, or death. -
Page 5: Personal Injury Warnings
Important Safety Information (cont.) Personal Injury Warnings Only qualified technicians should install and service the appliance. For assistance finding a qualified technician, please visit our Service Company Locator at truemfg.com/support/service-locator. TRUE is solely the appliance manufacturer and is not responsible for installation. DANGER! allow children to play with or in the appliance. -
Page 6: Hydrocarbon Refrigerant Warnings
HORIZONTAL AIR CURTAIN truemfg.com Important Safety Information (cont.) Hydrocarbon Refrigerant Warnings TRUE appliances use hydrocarbon refrigerant (R-290/513A/600a). Check the serial label to identify the appliance's refrigerant. Serial label location varies by model. DANGER! Risk of fire or explosion! Flammable refrigerant used. -
Page 7: Electrical Safety Warnings
• Before connecting your appliance to the power supply, verify the power supply is correctly grounded. If the power supply is not grounded, correct immediately. TRUE recommends hiring a qualified electrician to inspect your wall outlet and circuit to ensure they are properly grounded. -
Page 8: About Your Appliance & Installation Requirements
If the power supply is not grounded, correct immediately. • Ensure the installation location will provide adequate Thank you for choosing TRUE Manufacturing to meet your clearances and sufficient airflow for the appliance. refrigeration needs. TRUE highly recommends a qualified See "Clearances". -
Page 9: Recommended Operating Conditions
HORIZONTAL AIR CURTAIN truemfg.com About Your Appliance & Installation Requirements (cont.) Recommended Operating Conditions • Do not place in direct sunlight. • No HVAC supply or return air vents pushing air into or pulling air out of the appliance. • No ceiling fans. •... -
Page 10: Electrical Requirements
NEMA Plug Configurations USER ACTION! 60 HZ USE ONLY! TRUE uses these types of NEMA plugs shown. If you DO NOT have Find a copy of the wiring diagram with our serial number lookup at the proper outlet, have a licensed electrician verify and install the truemfg.com/support/serial-number-lookup. - Page 11 HORIZONTAL AIR CURTAIN truemfg.com Notes TEC_TM_087 | REV. B | EN 12/11/2023 Page 11 of 32...
-
Page 12: Installation & Setup
• If the appliance is damaged, note all damage on maintenance and cleaning procedures. the delivery receipt, immediately file a claim with he delivery freight carrier, and contact TRUE. tools, safety equipment, and PPE Use appropriate NOT install the appliance or put it in service. - Page 13 HORIZONTAL AIR CURTAIN truemfg.com Installation & Setup (cont.) Procedure 1. Remove the outer packaging (cardboard and bubble wrap or Styrofoam corner and clear plastic). See fig. 1. Inspect for concealed damage. Again, immediately file a claim with the freight carrier if there is damage. NOTICE ›...
-
Page 14: Appliance Location
HORIZONTAL AIR CURTAIN truemfg.com Installation & Setup (cont.) Appliance Location Procedure – Leveling Screws If leveling screws are not factory installed, then, with access to the • Ensure that the drain hose or hoses are positioned in the pan. appliance bottom, install the leveling screws into the threaded holes in the frame rail or appliance bottom. - Page 15 HORIZONTAL AIR CURTAIN truemfg.com Installation & Setup (cont.) Procedure — Castors USER ACTION! Lower Rail Assembly Castor Rail End Stem Install castors with brakes in the front. Snug Fit Here Leveling Bearing Shim Race 1. Access the appliance bottom. Castor 2.
-
Page 16: Level The Appliance
Proper leveling of your TRUE appliance is critical to operating The following procedure describes sealing a non-mobile appliance success (for non-mobile appliances). Leveling impacts effective to the floor for NSF standards. -
Page 17: Shelf Installation
HORIZONTAL AIR CURTAIN truemfg.com Installation & Setup (cont.) Shelf Installation For ease of installation, it is recommended that the lower shelf be installed first. 1. Install the shelf risers as shown in figs. 1a-c. 2. Slide the shelf supports into the front most riser slots. See fig. -
Page 18: Appliance Operation
All you need to do is plug in the appliance. • Good air flow inside your TRUE appliance is critical. Take care to prevent product from pressing against the sides or back wall and coming within 4" (101.6 mm) of the evaporator housing. -
Page 19: Temperature Control & Light Switch Location
HORIZONTAL AIR CURTAIN truemfg.com Appliance Operation (cont.) Temperature Control & Light Switch Location The light symbol shows the approximate location of the light switch. Light Switch Location On the left side of ceiling. Electronic Temperature Control Behind the front grill. °C °F TEC_TM_087 | REV. -
Page 20: General Sequence Of Operation
HORIZONTAL AIR CURTAIN truemfg.com Appliance Operation (cont.) General Sequence of Operation — Refrigerator and Freezer Appliances USER ACTION! For more information regarding a appliance's temperature control adjustment or general sequence of operation, please see our Temperature Control Adjustment—Sequence of Operation Manual in our resource library at or scan the truemfg.com/service-manuals/sequence-of-operation code. - Page 21 HORIZONTAL AIR CURTAIN truemfg.com Appliance Operation (cont.) TEC_TM_087 | REV. B | EN 12/11/2023 Page 21 of 32...
-
Page 22: Maintenance & Servicing
HORIZONTAL AIR CURTAIN truemfg.com Maintenance & Servicing Maintenance & Servicing WARNING! WARNING! • should install and Only qualified technicians Risk of electric shock or burn! service the appliance. For assistance finding • Powering off an electronic control or setting a qualified technician, please visit our Service temperature controls to the 0 (off) position DOES Company Locator at... -
Page 23: Component Replacement
Fig. 1. Example of OEM parts. Use of non-OEM components may void TRUE's warranty. • Have a licensed service provider service your appliance to minimize the risk of possible ignition due to incorrect parts or improper service and to ensure the operator's health and safety. -
Page 24: Recommended Maintenance
HORIZONTAL AIR CURTAIN truemfg.com Maintenance & Servicing (cont.) Recommended Maintenance See recommended maintenance tasks and frequencies below. Some tasks may be required more frequently based on your installation. Maintenance Tasks Monthly Quarterly Annually Verify the appliance maintains product temperature. Inspect power cord for damage; if damaged, replace immediately. Verify the power cord is fully plugged into the wall receptacle Inspect the overall condition of the appliance and its components (such as castors, doors, and hinges). - Page 25 HORIZONTAL AIR CURTAIN truemfg.com Maintenance & Servicing (cont.) Model: Serial Number: Jan. Feb. Mar. Apr. Jun. Jul. Aug. Sep. Oct. Nov. Dec. TEC_TM_087 | REV. B | EN 12/11/2023 Page 25 of 32...
-
Page 26: Condenser Coil Cleaning
HORIZONTAL AIR CURTAIN truemfg.com Maintenance & Servicing (cont.) Condenser Coil Cleaning Required Tools WARNING! Required tools include (but may not be limited to) the following: • Phillips screwdriver or bit driver for performing The appliance owner is responsible • 1/4" nut driver a Personal Protective Equipment (PPE) Hazard Assessment and ensuring adequate protection during •... - Page 27 Fig. 5. Remove the condenser base bolts. Fig. 6. Carefully slide the condensing unit out. Additional Information If you have any questions, please contact your local TRUE Manufacturing Service Department. See the front cover for locations and contact information. • DO NOT place any filter material in front of the condensing coil.
-
Page 28: General Surface Care & Cleaning
HORIZONTAL AIR CURTAIN truemfg.com Maintenance & Servicing (cont.) General Surface Care & Cleaning Gaskets WARNING! • Clean gaskets with warm soapy water. • DO NOT use sharp tools or knives to scrape a gasket. Risk of electrical shock or fire! •... -
Page 29: Stainless Steel Care & Cleaning
Stainless steel cleaners must be free of phosphates, chlorine, chloride, and ammonia. use any steel wool, abrasive, or chlorine- DO NOT True offers environmentally-friendly cleaner and polish through based products to clean stainless steel surfaces. our True Store at https://store.trueresidential.com/products/... -
Page 30: Tips To Help Prevent Rust On Stainless Steel
HORIZONTAL AIR CURTAIN truemfg.com Maintenance & Servicing (cont.) 8 Tips to Help Prevent Rust on Stainless Steel Maintain the Cleanliness of Your Equipment Rinse Avoid build-up of hard stains by cleaning frequently. Use When using chlorinated cleaners, you must rinse and wipe dry cleaners at the recommended strength (alkaline chlorinated or immediately. -
Page 31: Warranty Information
HORIZONTAL AIR CURTAIN truemfg.com Warranty Information (USA & Canada Only) Warranty Information To view and download the Warranty Information for USA & Canada, please scan the QR code below. TEC_TM_087 | REV. B | EN 12/11/2023 Page 31 of 32... - Page 32 truemfg.com 12/11/2023 P#975544 TEC_TM_087 | REV. B | EN DF_222969_11.23...