Related Manuals for Beko UL4482W
Summary of Contents for Beko UL4482W
- Page 1 Under the Counter Larder Fridge User manual UL4823W - UL4482W EN / 58 5171 0000/AD...
- Page 2 Please read these instructions first before using your appliance Thank you for choosing a Beko appliance. Please take some time to read this user manual before using your appliance, to ensure you know how to safely operate the controls and functions.
-
Page 3: Table Of Contents
1 Your refrigerator 4 Preparation 2 Warnings 5 Using your refrigerator Electrical requirements ......6 Using interior compartments .....15 Warning! This appliance must be Cooling ............15 earthed ............6 Stopping your product ......16 Energy saving tips ........7 Defrosting ..........16 Compliance with WEEE Directive and 6 Maintenance and Disposing of the Waste Product: ..8 cleaning... -
Page 4: Your Refrigerator
Your refrigerator Congratulations on your choice of a Beko quality Appliance which has been designed to give you service for many years. 1. Top trim 2. Movable shelves 3. Interior light & Thermostat knob 4. Defrost water collection channel -Drain tube 5. -
Page 5: Warnings
• Do not dispose of the • Ensure that the plug remains appliance on a fire. At Beko, readily accessible. Do not use the care and protection multiple adapter or extension of our environment is an cable. -
Page 6: Electrical Requirements
Beko authorised service been given supervision or agent. instruction concerning use of the appliance in a safe... -
Page 7: Energy Saving Tips
Important! Fitting A Energy saving tips Different Plug Ensure your appliance is As the colours of the wires installed in a well ventilated in the mains lead of this area. appliance may not correspond Ensure the time between with the coloured markings buying chilled/frozen food identifying the terminals in and placing them in your... -
Page 8: Compliance With Weee Directive And Disposing Of The Waste Product
Compliance with WEEE Package information Directive and Disposing of Packaging materials of the the Waste Product: product manufactured This product complies from recyclable materials in with WEEE accordance with our National Directive (2012/19/ Environment Regulations. Do EU). This product not dispose of the packaging bears a classification materials together with the symbol... -
Page 9: Installation
Installation Please remember that the Plastic wedges will provide the manufacturer shall not be held required distance between your liable if the information given in the refrigerator and the wall in order instruction manual is not observed. to allow the air circulation. (The illustrated figure is only an example Points to be considered and does not match exactly with your... -
Page 10: Electric Connection
Electric connection Disposing of your old refrigerator Connect your product to a grounded socket which is being protected by a Dispose of your old refrigerator fuse with the appropriate capacity. without giving any harm to the Important: environment. • The connection must be in •... -
Page 11: Adjusting The Feet
Changing the illumination Adjusting the feet lamp If your refrigerator is unbalanced; To change the Bulb/LED used for You can lever your refrigerator by illumination of your refrigerator, call turning the front feet as shown in your AuthorisedService. the illustration below. The corner The lamp(s) used in this appliance where the feet exists is lowered when is not suitable for household room... -
Page 12: Reversing The Doors
Reversing the doors... -
Page 13: Reversing The Door
Reversing the door 9. To refit the door, locate the top hinge in the door, attach to the Follow the step by step instructions cabinet and hold the door (8). and the diagram below. Numbers in 10. Fit the bottom hinge (9). If brackets refer to diagrams. -
Page 14: Preparation
Preparation • For a freestanding appliance; ‘this refrigerating appliance is not intended to be used as a built-in appliance’ . • Your refrigerator should be installed at least 30 cm away from heat sources such as hobs, ovens, central heater and stoves and at least 5 cm away from electrical ovens and should not be located under direct sunlight. -
Page 15: Using Your Refrigerator
Using your refrigerator Setting the operating temperature Frequently opening the door causes operating temperature the interior temperature to rise. regulated by the temperature control. For this reason, it is recommended to close the door again as soon as possible after use. Using interior 1 = Lowest cooling setting compartments... -
Page 16: Stopping Your Product
Stopping your product Attention Store concentrated alcohol only If your thermostat is equipped with standing upright and tightly closed. “0” position: Attention - Your product will stop operating Do not store explosive substances or when you turn the thermostat button containers with flammable propellant to “0”... - Page 17 Maintenance and cleaning • Remove the door shelves by pulling Cleaning your fridge at regular them up. After cleaning, slide them intervals will extend the service life of from top to bottom to install. the product. • Never use cleaning agents or water WARNING: that contain chlorine to clean the Unplug the product before cleaning...
- Page 18 Do's and don'ts Don’t- Don’t- Store poisonous or any Do- Clean your appliance regularly (See “Cleaning and Care”) dangerous substances in the larder refrigerator. Your larder refrigerator Do- Keep raw meat and poultry below has been designed for the storage cooked food and dairy products.
- Page 19 The standard guarantee starts from the date of original purchase of the product, and lasts for a period of twelve (12) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
- Page 20 - Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet. • Repairs to a product operated at any time on commercial or non-residential household premises (unless we have previously agreed to the installation environment).
- Page 21 Does Beko offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
- Page 22 If you are resident in the Republic of Ireland, this guarantee will be governed by Irish law and the Irish courts will have jurisdiction. This guarantee is provided by Beko plc. Beko House, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8QU.
- Page 23 For service under guarantee or for product advice please call our Contact centre Before requesting service please check the troubleshooting guide in the Operating Instructions booklet, as a charge may be levied where no fault is found, and even though your product may still be under guarantee. After arranging service the area around the product must be easily accessible to the Engineer, without the need for cabinets or furniture to be removed or moved.
- Page 24 Send us a secure message through our online contact us form. Please visit our website, click Contact Us and choose a product support topic from the list of options. Complete the required details and click send message. Product registrations For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register.
- Page 25 Self-repair can be done by the end-user with regard to the following spare parts: door handles,door hinges, trays, baskets and door gaskets (an updated list is also available in support.beko.com as of 1st March 2021). Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair or which are available in support.beko.com.
- Page 26 By way of example, but not limited to, the following repairs must be addressed to authorized professional repairers or registered professional repairers: compressor, cooling circuit, main board,inverter board, display board, etc. The manufacturer/seller cannot be held liable in any case where end-users do not comply with the above.