Download Print this page

Lake Lite LL-SDL-WAVE Quick Start Manual page 2

Solar wave dots - for wave armor docks

Advertisement

Solar Wave Dots – For Wave Armor Docks
LL-SDL-WAVE
Installing Batteries & Covers
1. Install battery.
2. Install silicone seal.
3. Install cover & snap.
4. Install outside silicone
5. Press into dock pocket.
Storage Tips (Harsh Winters)
COLD winter weather can reduce battery life expectancy!
•Extreme cold weather can dramatically reduce the life expectancy of your rechargeable Ni-Cd or Ni-Mh batteries.
•Store your Solar Dock Light inside during cold months when your dock is not in use.
•For best results follow these tips:
1. Charge batteries fully on a sunny day, before nightfall turn the switch to OFF.
2. Store Lights with batteries inside in a warmer indoor climate for longer battery life. (Switched Off)
3. If the lights will be stored in a cold climate its recommended to remove the batteries from the lights and
CAUTION: PLEASE KEEP OUR ENVIORNMENT CLEAN! BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY.
store the batteries in a warmer indoor climate.
Lake Lite Inc.
100 Industrial Dr.
Avilla, IN 46710
Battery
cover
Outside
Silicone
TO OPEN
NOTE: To remove battery cover use a
screwdriver & twist to unsnap cover.
Phone:
260-918-2758
E-mail sales@lakelite.com
Website www.lakelite.com
Light
Battery
Silicone
seal

Advertisement

loading

This manual is also suitable for:

Ll-swd-waveLl-swd-wave-xLl-swd-wave-b