[Office Meeting Mode]; [Webos Partners] - LG WP600 Owner's Manual

[Office Meeting Mode]

[Ez Setting]
You can set up Quick Functions to use the product in a conference room.
• Office Meeting Mode: Turning on this feature enables you to set functions related to the conference room meeting
mode.
• Meeting Guide Screen
- Meeting Guide Screen: Turning on this feature will allow you to use the conference information screen. This feature
is for displaying a background image when there is no external input. Turning it on will turn on the [No Signal Image]
feature.
- Meeting Room Name: When the conference information screen is on, you can change the conference room name
displayed on the screen or select whether or not to display the conference room name.
- Time: When the conference information screen is on, you can select whether or not to display the current time on
the screen.
• Advanced Settings
- Auto Bright: Turning on this feature will automatically adjust the monitor screen brightness to match the
surrounding environment.
- Picture Mode: Set the same picture mode for all external input supported by this product.
- Input Auto Switching: When an external input is inserted, it is automatically converted to the relevant external
input. Removing the external input or closing the app switches the input back to the previous status. Features
supported by input auto switching are external input, SuperSign content, the SI app, and Play via URL. Turning this
feature on switches the [Ez Setting]
-> - [SI App]: The SI app operates according to the settings in the [SI SERVER SETTING] menu in [Ez Setting].
-> - [Play via URL]: Play via URL operates according to the settings in the [Play via URL] menu in [Ez Setting].
- Auto Power Off: Switch the power off automatically. When this feature is turned on, the [No Signal Power Off (15
Min)] and [No IR Power Off (4 hour)] features will be turned on.
- Edit Input Name: Change the name of each external input.
- Presentation Timer: Use the presentation timer. Turning on this feature will display the [Presentation Timer] on the
screen for selecting an external input.
-> - [Presentation Timer]
-> - The time of operation can be set up to 120 minutes in intervals of ten minutes. When the time has been set,
press [Start] to begin the timer.
-> - Press the yellow button on the remote control to pause the timer. When the timer is paused, the time is
displayed in blue.
-> - Press the yellow button on the remote control to restart the timer.
-> - The time is displayed in red when the remaining time is less than three minutes. The time will blink when the
remaining time is less than one minute.
-> - Press the blue button on the remote control to end the timer.
-> - The UI will disappear automatically ten minutes after the timer has ended.
-> - The product may turn off while the timer is still in operation due to the auto-off and power saving settings.
NOTE
• If the No Signal image has been downloaded, turning on [Meeting Guide Screen] will display the downloaded image
first when there is no signal.
• If using the [Meeting Room Name] and [Time] items in the [Meeting Guide Screen], and if using the downloaded
image as the No Signal image, it is recommended to use a brightly-colored image in accordance with the optimal
resolution of the Signage model.

[webOS Partners]

[Ez Setting]
This is a function for installing webOS partners' apps.
The desired app can be installed by selecting it.
[Office Meeting Mode]
[Fail Over] feature off.
[webOS Partners]
33