Do not remove the cover or modify it in any way. High voltages which can cause severe electric shocks are present inside the Controller. For any inspection, adjustment, and repair work please contact your local InCoax dealer. The warranty is void if the cover has been opened.
This model of the Controller provides a throughput of 2.5 Gbps for the available single coax port. The in:xtnd™ System InCoax™ is a provider of broadband access solutions leveraging existing in-building coaxial cable networks. The in:xtnd™ System consists of a Management System which manages the Controllers installed in, or near, buildings and Modems installed in the customers’...
Controller to get configuration parameters and connects to the subscribers’ local area Ethernet e.g. usually a residential gateway using Ethernet CAT cables with RJ45 plug. (InCoax recommends using CAT5e cable type as a minimum for best performance.) The firmware of the Modem can be upgraded from the Controller.
Controller Web Interface The Controller can be managed via the management port using a web interface. Please refer to the InCoax document “in:xtnd™ Control Software User Manual” for a more detailed description of the web interface and how to set up the Controller. See reference {f}.
• 12 VDC, 5 A nominal. • Power consumption is 17 W nominal. • Automatic power on after power grid failure. InCoax recommends using the SFP+ module “MikroTik 10G S+RJ10”. Other SFP+ modules that are tested: Ubiquiti 10G UDC-2; Fiber MM: Ubiquiti 10G UF-CoaxMM-10G;...