Wolf CT30G Specifications

Model CT30G
30" Gas Cooktop
The patented dual-stacked burner design
of Wolf gas cooktops uses its upper-
level burner for maximum heat transfer.
Merely turn down the knob and the
lower-tier burners delivers fine-tuning
control and True Simmer. The sealed
burners and deep recess of the seamless
drawn pan make clean up a snap.
Features
Available in natural and LP gas
Stainless steel top construction, available
in classic and platinum stainless steel
finishes
Four dual-stacked, sealed burners with
automatic reignition on all settings
One large 15,000 Btu/hr sealed burner
with 800 Btu/hr delivered at simmer
One medium 12,000 Btu/hr sealed burner
with 800 Btu/hr delivered at simmer
Two small 9,200 Btu/hr sealed burners
with 300 Btu/hr delivered at simmer
Individual spark ignition system
True Simmer setting on all burners
Illuminated control panel with two-tiered
control knobs
Low-profile cast iron continuous burner
grates with matte porcelain finish
Seamless drawn burner pan
Classic Platinum
Model CT30G with classic stainless steel finish.
Model Options
Stainless Steel Finish
Type of Gas
Accessories
Filler strip for installation of multiple
cooktops or modules
One-piece wok grate and single
burner grate
High altitude conversion kit
Accessories are available through your
Wolf dealer. To obtain local dealer information,
visit the Showroom Locator section of our
website, wolfappliance.com.
Dual-Stacked Burners
Melt Setting Full-Flame Setting
CT30G/S CT30G/P CT30G/S-LP
Classic Platinum
Natural Natural
Model CT30G
This appliance is certified by Star-K to
meet strict religious regulations in
conjunction with specific instructions
found on www.star-k.org.
CT30/P-LP
Classic Platinum
LP LP