Download
Share
Print this page
Bilt Backyard Discovery WHISPERING POINT Manual
  1. Manuals
  2. Brands
  3. Bilt Manuals
  4. Swing Set
  5. Backyard Discovery WHISPERING POINT
  6. Manual

Bilt Backyard Discovery WHISPERING POINT Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476
J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 0800-567-8990
WHISPERING POINT
Swing Set
Model # 2300262
The assembly manual must be retained
since it contains important information
WARNING
Adult Assembly Required.
Not suitable for children under 36 months due to small parts.
FOR DOMESTIC USE ONLY. INTENDED FOR OUTDOOR USE.
For the most up to date assembly manual, to register your set, or to order replacement parts
Para obtener instrucciones en español, visite www.backyarddiscovery.com
MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive, Pittsburg, KS 66762
800-856-4445
Please visit www.backyarddiscovery.com
INS-2300262-A-WHISPERING POINT-ENG 09/13/23
Made in China

Advertisement

loading
Need help?

Need help?

Do you have a question about the Backyard Discovery WHISPERING POINT and is the answer not in the manual?

Questions and answers

Related Manuals for Bilt Backyard Discovery WHISPERING POINT

Summary of Contents for Bilt Backyard Discovery WHISPERING POINT

  • Page 1 MANUFACTURED BY: Backyard Discovery 3305 Airport Drive, Pittsburg, KS 66762 800-856-4445 Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 0800-567-8990 WHISPERING POINT Swing Set Model # 2300262 The assembly manual must be retained since it contains important information WARNING...
  • Page 2 Owner's Manual - Basic Setup Dimensions & Assembly Notes Place the set on level ground, not less than 6'-7" [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. • While assembling unit, take time before and after each phase to make sure fort is level.
  • Page 3 Owner's Manual - Parts Identification Wood Components (Not to Scale) SWING BEAM EXTENDED - W4L18222 (x1) 3 3/8"x5 1/4"x89 1/2" (86x134x2274) SB 9" BLOCK - W4L18223 3 3/8"x5 1/4"x9" (86x134x228) (x1) AD01 WALL RAIL - W4L18279 1"x3 7/8"x65 3/4" (24x100x1670) (x1) AD02 WALL RAIL - W4L18286...
  • Page 4 Owner's Manual - Parts Identification Wood Components (Not to Scale) FRONT ARCHED RAIL - W4L18270 1 3/8"x5 1/4"x59 1/2" (36x134x1510) (x1) ANGLE BRACE - W4L18261 1 7/16"x3 3/8"x17 1/2" (36x86x444) (x8) WALL BOARD - W4L18287 1 3/8"x3 3/8"x54 3/8" (36x86x1382) (x2) CROWS NEST FLOOR RAIL - W4L18291 1 3/8"x3 3/8"x33 1/4"...
  • Page 5 Owner's Manual - Parts Identification Wood Components (Not to Scale) ANGLE BRACE - W4L18219 (x2) 1 3/8"x3 3/8"x74 7/8" (36x86x1903) CROWS NEST WALL SUPPORT - W4L18297 1 3/8"x2 3/8"x55" (36x60x1397) (x2) CROWS NEST WALL SUPPORT - W4L18298 1 3/8"x2 3/8"x55" (36x60x1397) (x2) SUPPORT RAIL - W4L18227 1 3/8"x2 3/8"x56 7/8"...
  • Page 6 Owner's Manual - Parts Identification Wood Components (Not to Scale) WALL RAIL - W4L18272 1"x5 1/4"x40" (24x134x1017) (x2) GROUND BOARD - W4L18218 1"x5 1/4"x75 1/4" (24x134x1912) (x1) COUNTERTOP RAIL - W4L18240 1"x3 3/8"x59" (24x86x1498) (x1) WALL RAIL - W4L18245 1"x3 3/8"x40" (24x86x1017) (x1) WALL UPRIGHT - W4L18246 1"x3 3/8"x49"...
  • Page 7 Owner's Manual - Parts Identification Wood Components (Not to Scale) WALL BOARD - W4L18274 1"x3 3/8"x25 5/8" (24x86x650) (x1) WINDOW TRIM - W4L18275 1"x3 3/8"x47 1/8" (24x86x1198) (x1) WINDOW TRIM - W4L18494 1"x3 3/8"x47 1/8" (24x86x1198) (x1) WALL BOARD - W4L18282 1"x3 3/8"x54 3/8"...
  • Page 8 Owner's Manual - Parts Identification Wood Components (Not to Scale) CROWS NEST WALL RAIL - W4L18300 1"x3 3/8"x29 7/8" (24x86x758) (x2) CROWS NEST WALL RAIL - W4L18301 1"x3 3/8"x34 3/4" (24x86x882) (x2) CROWS NEST WALL RAIL - W4L18303 1"x3 3/8"x26" (24x86x660) (x2) CROWS NEST WALL RAIL - W4L18304 1"x3 3/8"x11 1/8"...
  • Page 9 Owner's Manual - Parts Identification Wood Components (Not to Scale) BAY WINDOW SIDE - W4L18277 1"x1 7/8"x18 1/4" (24x48x464) (x2) WINDOW TRIM - W4L18278 1"x2"x26 1/4" (24x50x668) (x2) COUNTERTOP BOARD - W4L18254 5/8"x5 1/4"x57" (16x134x1449) (x1) BAY WINDOW HEADER - W4L18276 5/8"x5 1/4"x47 1/4"...
  • Page 10 Owner's Manual - Parts Identification Wood Components (Not to Scale) PICKET - W4L18251 5/8"x3 3/8"x23 7/8" (16x86x606) (x12) COUNTERTOP BOARD - W4L18252 5/8"x3 3/8"x23 7/8" (16x86x605) (x2) COUNTERTOP BOARD - W4L18253 5/8"x3"x51 1/8" (16x76x1297) (x1) FLOOR BOARD - W4L18263 5/8"x3 3/8"x41 7/8" (16x86x1065) (x15) WALL BOARD - W4L18289 5/8"x3 3/8"x27"...
  • Page 11 Owner's Manual - Parts Identification Wood Components (Not to Scale) CLEAT - W4L18229 5/8"x2 3/8"x50 3/4" (16x60x1289) (x1) CROWS NEST WALL BOARD - W4L18319 5/8"x2 3/8"x22 3/8" (16x60x568) (x2) FILLER BOARD - W4L18233 5/8"x1 3/4"x21" (16x45x534) (x1) ROCK WALL BOARD - W4L18313 5/8"x1 5/8"x25 3/4"...
  • Page 12 Owner's Manual - Parts Identification Wood Components (Not to Scale) ROOF PANEL - W2A03949 (x1) 1 5/8"x15 5/8"x59 3/8" (42x396x1241) CROWS NEST ROOF PANEL - W2A03951 (x2) 1 5/8"x18 1/2"x38 3/8" (42x469x975)
  • Page 13 Owner's Manual - Parts Identification Hardware Components H100396 BOLT WH BLK H100480 BOLT WH BLK (x4) 5/16x1/2 (x2) 5/16x4 3/4 H100468 BOLT WH BLK H100513 BOLT WH BLK (x16) 5/16x1 (x9) 5/16x4-1/4 H100459 BOLT WH BLK H100415 BOLT WH BLK (x7) 5/16x1 1/4 (x71)
  • Page 14 Owner's Manual - Parts Identification Hardware Components H100385 SCREW PFH BLK H101169 BOLT HEX BLK (x7) (x13) 3/8x5-1/2 H100380 SCREW PFH BLK (x28) 8x1 1/8 H100657 BOLT HEX BLK H100659 LAG SCREW BLK (x4) (x9) 5/16x1 1/2 5/16x1 3/4 H100387 SCREW PFH BLK (x170) 8x1 1/4...
  • Page 15 Owner's Manual - Parts Identification Accessory Components (Not to Scale) A6P00708 ROPE-CHAIN BLACK 51.25" (x4) A6P00595 SWING SEAT GREY 22" (x2) A4M02171 SWING HANGER (x6) A4M00633 QUICK LINK BLK (x4) A4M01415 26" WEB SWING (x1) A100164 BYD ID TAG (LARGE) AGES 3-10 (x1) A4M01679 EXTENDED SWING BEAM BRACKET...
  • Page 16 Owner's Manual - Parts Identification Accessory Components (Not to Scale) A6P00332 A6P00335 PREMIUM SINK A6P00330 STOVE BASE (x1) INDUCTIVE BURNER KIT (x1) (x1) A6P00333 A6P00593 A6P00410 A6P00592 FAUCET GREY HC ROCK #2 PICKET PAL GREY HC ROCK #1 (x1) (x5) (x1) (x5) A6P00339...
  • Page 17 Owner's Manual - Parts Identification Accessory Components (Not to Scale) A6P00319 ARCHED GABLE (x2) A100321 A100373 PLASTIC WINDOW 44x412x485 BAY WINDOW PANEL (x2) (x3) A4M02252 AUGER GROUND STAKE (x8) A4M02250 HAND GRIP GREY 816 C/C (x2) A4M02251 LADDER RUNG 578 GREY (x2) A4M00855 L BRACKET 51x32x82x3.175...

  • Page 18: Hardware Parts

    PRE-ASSEMBLY STEP 1 - SORTING PARTS It is critical for ease of assembly that you take the time to sort and organize the wood and hardware. WOOD PARTS: • Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01). •...
  • Page 19 PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED Drill Attachments: Phillips Head Open End Wrenches 1/2" & 9/16" 1/8", 3/16", 3/8" & 7/16" Drill Bits 3/8" Drive Ratchet, 1/2" & 9/16" STD Sockets 1/2" & 9/16" Deep Sockets Phillips Screw Driver Cordless Drill or Electric Drill Rubber Mallet - Optional Claw Hammer...
  • Page 20 There are several types of assembly instructions available to you. 1. Printed Assembly Manual included with your set 2. BILT APP - 3D interactive instructions 3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two methods)
  • Page 21 ELECTRONICS SAFETY WARNING Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 22 STEP 1 - ROPE WALL QTY PART NUMBER DESCRIPTION 1 3/8 in H100391 SCREW PFH 8x2 BLK [36 mm] SUPPORT RAIL - W4L18227 FILLER BOARD - W4L18233 ROPE WALL BOARD - W4L18232 1 3/8"x2 3/8"x56 7/8" (36x60x1446) (x2) 5/8"x1 3/4"x21" (16x45x534) (x1) 1"x3 3/8"x21"...
  • Page 23 STEP 2 - ROPE WALL QTY PART NUMBER DESCRIPTION H100201 SCREW PFH 8x2 1/2 BLK LEFT RAIL - W4L18224 1 3/8"x3 3/8"x57 3/8" (36x86x1456) (x1) RIGHT RAIL - W4L18225 1 3/8"x3 3/8"x57 3/8" (36x86x1456) (x1) TOP VIEW HOLES OFFSET OUTWARDS (x12) SCREW - 2 1/2"...
  • Page 24 STEP 3 - ROPE WALL QTY PART NUMBER DESCRIPTION H100380 SCREW PFH 8x1-1/8" BLK CLEAT - W4L18229 5/8"x2 3/8"x50 3/4" (16x60x1289) (x1) BACK VIEW 6 5/8 in 1 3/4 in [167 mm] [46 mm] (x1) FLUSH TOPS (x14) SCREW - 1 1/8" 7 7/8 in [201 mm] BOTH SIDES...

  • Page 25: Side View

    STEP 4 - ROPE WALL QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1-1/2" BLK TOP BOARD - W4L18226 5/8"x3 1/4"x23 7/8" (16x82x606) (x1) SIDE VIEW (x4) SCREW - 1 1/2" (x1) 1 in [24 mm]...
  • Page 26 STEP 5 - ROPE WALL QTY PART NUMBER DESCRIPTION H100201 SCREW PFH 8x2 1/2" BLK H100379 T-NUT 5/16 BLK ATTACHMENT BOARD - W4L18228 HOLES DOWNWARD (x1) 1"x3 3/8"x23 7/8" (24x86x606) TIP: SIDE VIEW INSTALL T-NUTS IN WOOD FIRST (x1) T-NUT (x2) T-NUT - 5/16"...
  • Page 27 STEP 1 - BAY WINDOW ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1-1/2" BLK H100385 SCREW PFH 8x1" BLK BAY WINDOW SIDE - W4L18277 1"x1 7/8"x18 1/4" (24x48x464) (x2) BAY WINDOW HEADER - W4L18276 A100373 BAY WINDOW PANEL 5/8"x5 1/4"x47 1/4" (16x134x1199) (x2) NOTE HOLE POSITIONS (x2)
  • Page 28 STEP 1 - CROWS NEST DECK ASSEMBLY QTY PART NUMBER DESCRIPTION H100201 SCREW PFH 8x2-1/2" BLK H100379 T-NUT 5/16" BLK CROWS NEST FLOOR RAIL - W4L18291 (x2) 1 3/8"x3 3/8"x33 1/4" (36x86x846) CROWS NEST FLOOR RAIL - W4L18293 1"x3 3/8"x27" (24x86x686) (x1) TIP: INSTALL T-NUTS IN WOOD FIRST...

  • Page 29: Inside View

    STEP 2 - CROWS NEST DECK ASSEMBLY QTY PART NUMBER DESCRIPTION H100205 BOLT WH 5/16x2-1/4" BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16" BLK CROWS NEST DECK BRACE - W4L18292 1 7/16"x3 3/8"x10 7/8" (36x86x276) (x2) TIP: INSIDE VIEW INSTALL T-NUTS IN WOOD FIRST (x2) (x2)
  • Page 30 STEP 3 - CROWS NEST DECK ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1-1/2" BLK CROWS NEST FLOOR BOARD - W4L18295 (x6) 5/8"x4 3/8"x27" (16x112x686) CROWS NEST FLOOR BOARD - W4L18296 CROWS NEST FLOOR BOARD - W4L18306 5/8"x4 3/8"x27" (16x112x686) (x1) 5/8"x5 1/4"x27"...
  • Page 31 STEP 4 - CROWS NEST DECK ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1-1/4" BLK CROWS NEST FLOOR SUPPORT - W4L18294 1"x3 3/8"x24 1/8" (24x86x614) (x1) NOTE: MARK LOCATIONS SHOWN. USING A 3/16" (5 mm) DRILL BIT, DRILL (2) PILOT HOLES.
  • Page 32 STEP 1 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100201 SCREW PFH 8x2-1/2" BLK LEFT UPRIGHT - W4L18307 1 3/8"x3 3/8"x57 1/8" (36x86x1450) (x1) LADDER RUNG - W4L18309 (x4) 1"x3 3/8"x21 3/4" (24x86x554) TIP: ALIGN PILOT HOLES (x1) (x8) SCREW - 2 1/2"...
  • Page 33 STEP 2 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100201 SCREW PFH 8x2-1/2" BLK MIDDLE UPRIGHT - W4L18308 1 3/8"x3 3/8"x57 1/8" (36x86x1450) (x1) (x1) (x8) SCREW - 2 1/2"...

  • Page 34: Bottom View

    STEP 3 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2" BLK UPRIGHT - W4L18318 1 3/8"x2 3/4"x56 7/8" (36x70x1444) (x2) RIGHT UPRIGHT - W4L18312 1 3/8"x3 3/8"x57 1/8" (36x86x1450) (x1) (x10) SCREW - 2" FLUSH (x1) (x2)

  • Page 35: Front View

    STEP 4 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION BOLT WH 1/4x3/4 BLK H101111 H100473 WASHER LOCK EXT 8x15 BLK H100398 T-NUT 1/4 BLK ROCK BOARD - W4L18315 5/8"x3 3/8"x25 3/4" (16x86x655) (x4) ROCK BOARD - W4L18316 5/8"x3 3/8"x25 3/4"...
  • Page 36 STEP 5 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1-1/2" BLK M15 LA (x2) ROCK BOARD - W4L18314 5/8"x3 3/8"x25 3/4" (16x86x655) (x9) M16 DA (x3) M15 RA (x2) ROCK WALL BOARD - W4L18313 (x1) 5/8"x1 5/8"x25 3/4"...
  • Page 37 STEP 6 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1-1/2" BLK REAR SUPPORT - W4L18310 5/8"x3 3/8"x23 7/8" (16x86x606) (x1) (x1) (x4) SCREW - 1 1/2"...
  • Page 38 STEP 7 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2" BLK H100379 T-NUT 5/16" BLK 21 1/2 in [548 mm] ATTACHMENT BOARD - W4L18311 HOLES DOWNWARD 1"x3 3/8"x51 1/8" (24x86x1297) (x1) TIP: INSTALL T-NUTS IN WOOD FIRST 21 1/2 in [548 mm] (x1)
  • Page 39 STEP 8 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100380 SCREW PFH 8x1 1/8" BLK H100391 SCREW PFH 8x2" BLK TOP BOARD - W4L18322 5/8"x3 3/8"x28 5/8" (16x86x728) (x1) ROCKWALL CLEAT - W4L18317 (x1) 5/8"x2 3/8"x53 7/8" (16x60x1370) (x4) SIDE VIEW SCREW - 2"...
  • Page 40 STEP 9 - LADDER & ROCK WALL ASSEMBLY QTY PART NUMBER DESCRIPTION H100503 BOLT WH 5/16x3-1/2" BLK H100379 T-NUT 5/16" BLK A4M02250 HAND GRIP GREY 816 C/C (x2) TIP: INSTALL T-NUTS IN WOOD FIRST (x4) T-NUT - 5/16" (x4) BOLT - 3 1/2" (x2) HAND GRIP GREY 816 C/C...
  • Page 41 STEP 1 - SWING BEAM ASSEMBLY QTY PART NUMBER DESCRIPTION H100416 BOLT WH 5/16x3" BLK H100192 NUT BARREL WH 5/16x7/8" BLK SWING BEAM EXTENDED - W4L18222 3 3/8"x5 1/4"x89 1/2" (86x134x2274) (x1) SWING BEAM A4M00617 SB 9" BLOCK - W4L18223 EXTENSION (x1) 3 3/8"x5 1/4"x9"...
  • Page 42 STEP 2 - SWING BEAM ASSEMBLY QTY PART NUMBER DESCRIPTION H101166 WASHER LOCK INT 10x18 BLK H101167 WASHER FLAT 11x25 BLK H101168 T-NUT 3/8" BLK H101169 BOLT HEX 3/8x5-1/2 BLK A4M02171 SWING HANGER (x6) TIP: INSTALL T-NUTS IN WOOD FIRST (x12) T-NUT - 3/8"...
  • Page 43 STEP 3 - SWING BEAM ASSEMBLY QTY PART NUMBER DESCRIPTION H100202 SREW PWH 8x5/8" BLK A100164 BYD ID TAG (LARGE) (x1) AGES 3-10 FRONT VIEW 49 3/4 in [1265 mm] (x1) BYD ID TAG (LARGE) AGES 3-10 (x4) SCREW - 5/8"...
  • Page 44 STEP 4 - SWING BEAM ASSEMBLY QTY PART NUMBER DESCRIPTION H100503 BOLT WH 5/16x3-1/2" BLK H100407 BOLT WH 5/16x1-1/2" BLK H100379 T-NUT 5/16" BLK SP71 SWING BEAM SUPPORT - W4L18221 3 3/8"x3 3/8"x49 1/2" (86x86x1256) (x1) ANGLE BRACE - W4L18219 A4M01782 1 3/8"x3 3/8"x74 7/8"...
  • Page 45 STEP 5 - SWING BEAM ASSEMBLY QTY PART NUMBER DESCRIPTION H100195 BOLT WH 5/16x2-3/4" BLK H100205 BOLT WH 5/16x2-1/4" BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16" BLK END SUPPORT - W4L18220 1 1/2"x3 1/2"x44" (36x86x1120) (x1) H100480 BOLT WH 5/16x4-3/4"...

  • Page 46: Nut Barrel

    STEP 6 - SWING BEAM ASSEMBLY QTY PART NUMBER DESCRIPTION H100416 BOLT WH 5/16x3" BLK H100192 NUT BARREL WH 5/16x7/8" BLK TIP: TIGHTEN ALL 416 BOLTS & 192 NUT BARRELS NOW. (x2) NUT BARREL - 7/8" (x2) BOLT - 3"...
  • Page 47 STEP 1 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100415 BOLT WH 5/16x3 3/4 BLK POST - W4L18235 3"x3"x52 3/8" (76x76x1330) (x1) FLOOR RAIL - W4L18257 POST ASSEMBLY - W2A03946 1"x5 1/4"x40"...
  • Page 48 STEP 2 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100415 BOLT WH 5/16x3 3/4 BLK POST - W4L18234 GROUND BOARD - W4L18238 1"x5 1/4"x40" (24x134x1017) 3"x3"x52 3/8" (76x76x1330) (x1) (x1) FLOOR RAIL - W4L18258 POST - W4L18236 1"x5 1/4"x40"...
  • Page 49 STEP 3 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100415 BOLT WH 5/16x3 3/4 BLK GROUND BOARD - W4L18237 1"x5 1/4"x59" (24x134x1498) (x2) TIP: INSTALL T-NUTS IN WOOD FIRST (x1) (x8) BOLT - 3 3/4"...
  • Page 50 STEP 4 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100415 BOLT WH 5/16x3 3/4 BLK COUNTERTOP RAIL - W4L18240 (x1) 1"x3 3/8"x59" (24x86x1498) WALL RAIL - W4L18245 1"x3 3/8"x40" (24x86x1017) (x1) TIP: INSTALL T-NUTS IN WOOD FIRST...
  • Page 51 STEP 5 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100378 BOLT WH 5/16x1 3/4 BLK H100379 T-NUT 5/16 BLK WALL UPRIGHT - W4L18246 H100415 BOLT WH 5/16x3 3/4 BLK (x1) 1"x3 3/8"x49" (24x86x1244) 1 3/4 in [43 mm] WALL RAIL - W4L18247 1"x3 3/8"x21 3/4"...
  • Page 52 STEP 6 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2 BLK COUNTERTOP RAIL - W4L18248 (x1) 1"x2 3/8"x57 1/8" (24x60x1450) TIP: ALIGN PILOT HOLES ON BOTH ENDS (x1) (x4) SCREW - 2"...
  • Page 53 STEP 7 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK PICKET - W4L18251 5/8"x3 3/8"x23 7/8" (16x86x606) (x2) (x2) (x8) SCREW - 1 1/4" A6P00410 PICKET PAL (x1) INSIDE VIEW 1 1/8 in [28 mm] 2 in 2 7/8 in [52 mm]...
  • Page 54 STEP 8 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK PICKET - W4L18251 5/8"x3 3/8"x23 7/8" (16x86x606) (x5) (x20) SCREW - 1 1/4" (x5) A6P00410 PICKET PAL (x1) INSIDE VIEW 1 1/8 in [28 mm] 2 in [52 mm] 2 7/8 in...

  • Page 55: Inside View

    STEP 9 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2 BLK COUNTERTOP RAIL - W4L18249 1"x2 3/8"x10 3/4" (24x60x272) (x2) COUNTERTOP RAIL - W4L18250 1"x2 3/8"x10 3/4" (24x60x272) (x2) TIP: ALIGN PILOT HOLES ALL PLACES (x1) (x2) INSIDE VIEW (x16) SCREW - 2"...
  • Page 56 STEP 10 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1 1/2 BLK COUNTERTOP BOARD - W4L18252 COUNTERTOP BOARD - W4L18254 5/8"x3 3/8"x23 7/8" (16x86x605) (x2) 5/8"x5 1/4"x57" (16x134x1449) (x1) COUNTERTOP BOARD - W4L18253 5/8"x3"x51 1/8" (16x76x1297) (x1) (x22) SCREW - 1 1/2"...
  • Page 57 STEP 11 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK POST - W4L18265 H100415 BOLT WH 5/16x3 3/4 BLK 3"x3"x60 3/8" (76x76x1532) (x1) POST - W4L18266 FLOOR RAIL - W4L18255 (x1) 3"x3"x60 3/8"...
  • Page 58 STEP 12 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100201 SCREW PFH 8x2 1/2 BLK FLOOR JOIST - W4L18259 1"x3 3/8"x57 1/8" (24x86x1450) (x1) TIP: ALIGN PILOT HOLES ON BOTH ENDS (x1) (x4) SCREW - 2 1/2"...
  • Page 59 STEP 13 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1 1/2 BLK FLOOR BLOCK - W4L18260 (x4) 1"x3"x3 3/8" (24x76x86) FLUSH SIDES FLUSH TOPS (x4) (x8) SCREW - 1 1/2"...
  • Page 60 STEP 14 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100205 BOLT WH 5/16x2 1/4 BLK H100379 T-NUT 5/16 BLK H100405 WASHER LOCK EXT 6x15 BLK H100792 LAG SCREW WH 1/4x3 BLK ANGLE BRACE - W4L18261 1 7/16"x3 3/8"x17 1/2"...

  • Page 61: Start Here

    STEP 15 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1 1/2 BLK FLOOR BOARD - W4L18262 (x2) 5/8"x3 7/8"x34" (16x100x864) FLOOR BOARD - W4L18263 5/8"x3 3/8"x41 7/8" (16x86x1065) (x15) NOTE: ENSURE THAT PILOT HOLES ARE ALIGNED OVER FLOOR JOISTS. (x1) (x89) SCREW - 1 1/2"...
  • Page 62 STEP 16 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100378 BOLT WH 5/16x1 3/4 BLK H100379 T-NUT 5/16 BLK LADDER & ROCKWALL (x1) COMBO ASSEMBLY TIP: INSTALL T-NUTS IN WOOD FIRST (x2) T-NUT - 5/16" FIG.
  • Page 63 STEP 17 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100415 BOLT WH 5/16x3 3/4 BLK WALL RAIL - W4L18264 1"x3 3/8"x40" (24x86x1017) (x1) WALL RAIL - W4L18269 1"x3 3/8"x40" (24x86x1017) (x1) TIP: INSTALL T-NUTS IN WOOD FIRST...
  • Page 64 STEP 18 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100513 BOLT WH 5/16x4 1/4 BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK TOP SWING BEAM RAIL - W4L18273 1 3/8"x6 3/4"x40" (36x172x1017) (x1) FRONT ARCHED RAIL - W4L18270 1 3/8"x5 1/4"x59 1/2"...
  • Page 65 STEP 19 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100415 BOLT WH 5/16x3 3/4 BLK WALL RAIL - W4L18272 1"x5 1/4"x40" (24x134x1017) (x1) 2 7/8 in [74 mm] BACK ARCHED RAIL - W4L18271 1"x5 1/4"x59 1/2"...
  • Page 66 STEP 20 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK PICKET - W4L18251 5/8"x3 3/8"x23 7/8" (16x86x606) (x5) (x20) (x5) SCREW - 1 1/4" A6P00410 PICKET PAL (x1) INSIDE VIEW 2 7/8 in [73 mm] 1 1/8 in [28 mm] 2 in...
  • Page 67 STEP 21 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100205 BOLT WH 5/16x2 1/4 BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100396 BOLT WH 5/16x1/2 BLK H100199 WASHER LOCK EXT 12x19 BLK WALL BOARD - W4L18274 1"x3 3/8"x25 5/8"...
  • Page 68 STEP 22 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100378 BOLT WH 5/16x1 3/4 BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100396 BOLT WH 5/16x1/2 BLK H100199 WASHER LOCK EXT 12x19 BLK H100192 NUT BARREL WH 5/16x7/8 BLK A4M01047 L BRACKET 2.5x38x55x55 (x1)
  • Page 69 STEP 23 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100415 BOLT WH 5/16x3 3/4 BLK 6 5/8 in 5 7/8 in H100378 BOLT WH 5/16x1 3/4 BLK [148 mm] [167 mm] H100198 WASHER LOCK EXT 8x19 BLK AD01 H100379 T-NUT 5/16 BLK WALL RAIL - W4L18279 1"x3 7/8"x65 3/4"...
  • Page 70 STEP 24 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100415 BOLT WH 5/16x3 3/4 BLK H100503 BOLT WH 5/16x3 1/2 BLK WALL RAIL - W4L18280 5/8"x3 3/8"x40" (16x86x1017) (x1) WALL RAIL - W4L18264 (x1) 1"x3 3/8"x40"...
  • Page 71 STEP 25 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK 8 7/8 in 8 3/4 in [226 mm] [222 mm] WALL RAIL - W4L18283 5/8"x5 1/4"x29 3/8" (16x134x746) (x4) FLUSH TOPS NOTE HOLE (x4) 8 3/4 in LOCATIONS [222 mm] (x16)
  • Page 72 STEP 26 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK WALL BOARD - W4L18284 WALL BOARD - W4L18285 5/8"x4 3/8"x6 5/8" (16x112x167) 5/8"x4 3/8"x7 1/4" (16x112x184) (x4) (x4) WALL BOARD - W4L18281 WALL BOARD - W4L18239 5/8"x4 3/8"x6 5/8"...
  • Page 73 STEP 27 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100797 PWH SCREW 8x1 BLK A100321 PLASTIC WINDOW 44x412x485 (x2) (x24) SCREW - 1" (x2) PLASTIC WINDOW 44x412x485...
  • Page 74 STEP 28 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1 1/2 BLK WINDOW TRIM - W4L18275 1"x3 3/8"x47 1/8" (24x86x1198) (x1) WINDOW TRIM - W4L18278 1"x2"x26 1/4" (24x50x668) (x2) WINDOW TRIM - W4L18494 1"x3 3/8"x47 1/8" (24x86x1198) (x1) (x1) (x14)
  • Page 75 STEP 29 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100200 SCREW PFH 8x1 1/2 BLK BAY WINDOW ASSEMBLY (x1) (x8) SCREW - 1 1/2" FLUSH INSIDE VIEW...
  • Page 76 STEP 30 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100205 BOLT WH 5/16x2 1/4 BLK H100195 BOLT WH 5/16x2 3/4 BLK H100198 WASHER LOCK EXT 8x19 BLK WALL BOARD - W4L18287 H100379 T-NUT 5/16 BLK 1 3/8"x3 3/8"x54 3/8" (36x86x1382) (x2) TIP: INSTALL T-NUTS IN WOOD FIRST...
  • Page 77 STEP 31 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100378 BOLT WH 5/16x1 3/4 BLK H100205 BOLT WH 5/16x2 1/4 BLK H100198 WASHER LOCK EXT 8x19 BLK WALL BOARD - W4L18288 H100379 T-NUT 5/16 BLK 1"x3 3/8"x54 3/8" (24x86x1382) (x2) TIP: INSTALL T-NUTS IN WOOD FIRST (x6)
  • Page 78 STEP 32 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK WALL BOARD - W4L18289 (x6) 5/8"x3 3/8"x27" (16x86x686) (x24) SCREW - 1 1/4" (x6)
  • Page 79 STEP 33 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100498 BOLT HEX 5/16x1 1/2 BLK H100477 WASHER SPLIT 5/16 BLK H100478 WASHER FLAT 8x27 SWING BEAM (x1) ASSEMBLY (x4) WASHER - 8x27 (x4) WASHER - 5/16 (x4) BOLT - 1 1/2"...
  • Page 80 STEP 34 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100192 NUT BARREL WH 7/8 BLK H100199 WASHER LOCK EXT 12x19 BLK H100200 SCREW PFH 8x1 1/2 BLK H100405 WASHER LOCK EXT 6x15 BLK H100456 LAG SCREW 1/4x2 1/2 BLK H100477 WASHER SPLIT 5/16 BLK H100478 WASHER FLAT 8x27 BLK...
  • Page 81 STEP 35 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100659 LAG SCREW HEX 5/16x1 1/2 BLK H100477 WASHER SPLIT 5/16 BLK H100478 WASHER FLAT 8x27 BLK A4M00855 L BRACKET 51x32x82x3.175 (x2) NOTE: (x2) USING BRACKET AS A GUIDE, L BRACKET 51x32x82x3.175 DRILL 3/16"...
  • Page 82 STEP 36 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100195 BOLT WH 5/16x2 3/4 BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK CROWS NEST WALL SUPPORT - W4L18297 1 3/8"x2 3/8"x55" (36x60x1397) (x2) CROWS NEST WALL SUPPORT - W4L18298 1 3/8"x2 3/8"x55"...
  • Page 83 STEP 37 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100205 BOLT WH 5/16x2 1/4 BLK H100484 BOLT WH 5/16x3 1/4 BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK CROWS NEST WALL RAIL - W4L18300 1"x3 3/8"x29 7/8" (24x86x758) (x1) CROWS NEST WALL RAIL - W4L18301 1"x3 3/8"x34 3/4"...
  • Page 84 STEP 38 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100468 BOLT WH 5/16x1 BLK H100471 LAG SCREW WH 5/16x1 1/2 BLK H100379 T-NUT 5/16 BLK A4M01047 L BRACKET 2.5x38x55x55 (x2) TIP: INSTALL T-NUTS IN WOOD FIRST 1047 (x2) L BRACKET 2.5x38x55x55 ALIGN PILOT HOLES (x2) BOLT - 1"...
  • Page 85 STEP 39 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100205 BOLT WH 5/16x2 1/4 BLK H100416 BOLT WH 5/16x3 BLK H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100484 BOLT WH 5/16x3 1/4 BLK CROWS NEST WALL RAIL - W4L18300 1"x3 3/8"x29 7/8"...
  • Page 86 STEP 40 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100205 BOLT WH 5/16x2 1/4 BLK 1 1/8 in H100468 BOLT WH 5/16x1 BLK [30 mm] H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100471 LAG SCREW WH 5/16x1 1/2 BLK CROWS NEST WALL RAIL - W4L18304 1"x3 3/8"x11 1/8"...
  • Page 87 STEP 41 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK CROWS NEST WALL BOARD - W4L18319 5/8"x2 3/8"x22 3/8" (16x60x568) (x2) (x4) SCREW - 1 1/4" (x2) A6P00410 PICKET PAL (x1) INSIDE VIEW 3 1/4 in [81 mm]...
  • Page 88 STEP 42 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK CROWS NEST WALL BOARD - W4L18305 5/8"x1 3/8"x32 1/4" (16x34x819) (x6) (x12) SCREW - 1 1/4" (x6) A6P00410 PICKET PAL (x1) 2 3/4 in [69 mm] FLUSH BOTTOMS INSIDE END VIEW...
  • Page 89 STEP 43 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK CROWS NEST WALL BOARD - W4L18305 5/8"x1 3/8"x32 1/4" (16x34x819) (x10) (x20) SCREW - 1 1/4" (x10) A6P00410 PICKET PAL (x1) 2 1/2 in [62 mm] FLUSH BOTTOMS INSIDE SIDE VIEW...
  • Page 90 STEP 44 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100198 WASHER LOCK EXT 8x19 BLK H100379 T-NUT 5/16 BLK H100392 SCREW PWH 8x3/4 BLK H100484 BOLT WH 5/16x3 1/4 BLK CROWS NEST WALL RAIL - W4L18299 1"x3 3/8"x26" (24x86x660) (x2) LEFT ROOF RAFTER - W4L18325 A4M02100 1"x3 3/8"x17 3/4"...
  • Page 91 STEP 45 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2 BLK CROWS NEST ROOF PANEL - W2A03951 1 5/8"x18 1/2"x38 3/8" (42x469x975) (x2) (x1) (x1) (x8) SCREW - 2"...
  • Page 92 STEP 46 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100797 SCREW PWH 8x1 BLK A6P00319 ARCHED GABLE (x2) (x2) ARCHED GABLE (x16) SCREW - 1" 4 7/8 in [123 mm] FRONT VIEW...
  • Page 93 STEP 47 - FORT ASSEMBLY PART DESCRIPTION NUMBER H100192 NUT BARREL WH 5/16x7/8 BLK H100198 WASHER LOCK EXT 8x19 BLK H100199 WASHER LOCK EXT 12x19 BLK LEFT ROOF RAFTER - W4L18323 H100378 BOLT WH 5/16x1 3/4 BLK 1"x3 3/8"x42 1/8" (24x86x1069) (x2) H100797 SCREW PWH 8x1 BLK...
  • Page 94 STEP 48 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2 BLK PEAK ROOF PANEL - W2A03948 1 5/8"x13 3/8"x48 7/8" (42x341x1241) (x2) (x1) (x1) (x8) SCREW - 2"...
  • Page 95 STEP 49 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2 BLK ROOF PANEL - W2A03947 1 5/8"x15 5/8"x59 3/8" (42x396x1241) (x2) (x1) (x1) (x8) SCREW - 2"...
  • Page 96 STEP 50 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100391 SCREW PFH 8x2 BLK ROOF PANEL - W2A03947 ROOF PANEL - W2A03949 (x1) 1 5/8"x15 5/8"x59 3/8" (42x396x1241) (x1) 1 5/8"x15 5/8"x59 3/8" (42x396x1241) IF NEEDED H24 BOARDS MAY BE REMOVED TO EASE INSTALLATION OF 391 SCREWS (x1)
  • Page 97 STEP 51 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100385 SCREW PFH 8x1 BLK A6P00333 FAUCET (x1) (x1) FAUCET (x2) SCREW - 1"...
  • Page 98 STEP 52 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100202 SCREW PWH 8x5/8 BLK A6P00332 PREMIUM SINK (x1) (x1) PREMIUM SINK (x4) SCREW - 5/8"...

  • Page 99: Stove Assembly

    STOVE ASSEMBLY A6P00330 INDUCTIVE BURNER KIT (x1) A6P00335 STOVE BASE (x1) NOTE: FCC LABEL -DO NOT MIX OLD AND NEW BATTERIES. -DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC), OR RECHARGEABLE (NI-CAD, NI-MH, ETC.) BATTERIES. -NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. -ONLY BATTERIES OF THE SAME OR EQUIVALENT TYPE AS RECOMMENDED ARE TO BE USED.
  • Page 100 STEP 53 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100202 SCREW PWH 8x5/8 BLK A6P00330 INDUCTIVE BURNER KIT (x1) A6P00335 STOVE BASE (x1) (x1) STOVE BASE (x4) SCREW - 5/8" (x1) INDUCTIVE BURNER...
  • Page 101 STEP 54 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100378 BOLT WH 5/16x1 3/4 BLK H100198 WASHER LOCK EXT 8x19 BLK ROPE WALL ASSEMBLY (x1) (x2) BOLT - 1 3/4" (x2) WASHER - 8x19...
  • Page 102 STEP 55 - ROPE CLAMP ASSEMBLY ROPE CLAMP ATTACHED IN NEXT STEP. (x2) BOLT TPH - 1 1/2" (x2) NUT - 1/4" (x1) ROPE CLAMP KIT (x1) 7'-7 1/4" ROPE...
  • Page 103 STEP 56 - FORT ASSEMBLY A6P00617 7'-7 1/4" ROPE (x1) A6P00508 ROPE CLAMP KIT (x6) MINIMUM 2 INCHES [50mm] OF ROPE OUT OF ROPE CLAMP 8 3/8 in [212 mm] ROPE CLAMP SPACING 26 3/8 in [668 mm]...
  • Page 104 STEP 57 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100468 BOLT WH 5/16x1 BLK H100379 T-NUT 5/16 BLK H100471 LAG SCREW WH 5/16x1 1/2 BLK A4M02249 HAND GRIP METAL GREY 381 C/C (x3) TIP: INSTALL T-NUTS IN WOOD FIRST (x4) LAG SCREW - 1 1/2"...
  • Page 105 STEP 58 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100468 BOLT WH 5/16x1 BLK H100379 T-NUT 5/16 BLK H100471 LAG SCREW WH 5/16x1 1/2 BLK A4M02249 HAND GRIP METAL GREY 381 C/C (x2) TIP: INSTALL T-NUTS IN WOOD FIRST (x2) LAG SCREW WH 5/16x1-1/2 BLK (x2) HAND GRIP METAL GREY 381 c/c...
  • Page 106 STEP 59 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100468 BOLT WH 5/16x1 BLK H100379 T-NUT 5/16 BLK A4M02251 LADDER RUNG 578 GREY (x2) TIP: INSTALL T-NUTS IN WOOD FIRST (x4) T-NUT - 5/16" (x4) BOLT - 1" (x2) LADDER RUNG 578 GREY...
  • Page 107 STEP 60 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100387 SCREW PFH 8x1 1/4 BLK A6P00596 TELESCOPE GREY (x1) (x2) SCREW - 1 1/4" (x1) TELESCOPE...
  • Page 108 STEP 1 - WEB SWING ASSEMBLY QTY PART NUMBER DESCRIPTION H100831 NUT BARREL PTH BLK 1/4x3/4 H100832 BOLT PTH 1/4x3/4 IMPORTANT: SLIDE ROPE LOOPS OVER TUBE ENDS FIRST! SLIDE NARROW END OF TUBES INTO LARGER OPENING AFTER SLIDING ROPE LOOPS ONTO TUBES. (x4) BOLT - 3/4"...
  • Page 109 STEP 61 - FORT ASSEMBLY A6P00708 ROPE-CHAIN BLACK 51.25" (x4) A4M00633 A6P00595 QUICK LINK BLK SWING SEAT GREY 22" (x4) (x2) A4M01415 26" WEB SWING (x1) NOTE: WHEN HANGING YOUR SWINGS, IT IS REQUIRED TO ONLY TRIM AROUND THE SPECIFIC CHAIN LOOP THAT ALLOWS THE BOTTOM OF THE SWING SEAT, (WHEN SITTING ON IT) TO BE NO LOWER THEN (35cm) 13 7/8...
  • Page 110 STEP 62 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100468 BOLT WH 5/16x1 BLK H100379 T-NUT 5/16 BLK A6P00554 8' BLOW MOLDED SLIDE - GREY (x1) (x1) 8' BLOW MOLDED SLIDE - GRAY (x2) BOLT - 1" 2 in 2 in [50 mm] [50 mm] (x2)
  • Page 111 STEP 63 - FORT ASSEMBLY QTY PART NUMBER DESCRIPTION H100459 BOLT WH 5/16x1 1/4 BLK H100379 T-NUT 5/16 BLK H100197 LAG SCREW WH 5/16x2 1/2 BLK A4M02252 AUGER GROUND STAKE (x8) DETAIL (B) DETAIL (A) (x1) T-NUT - 5/16" (x1) T-NUT - 5/16"...

This manual is also suitable for:

2300262