Advertisement
Quick Links
THANK YOU FOR CHOOSING XYLEM
Please take a few minutes to review this manual before you start installation. If you encounter any
installation problems, please don't hesitate to contact us.
Before you begin, please observe all local building codes. Unpack the new product and inspect for
damage.
The appearance of your shelf may differ from the illustrations in this guide. This instructions still apply.
SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver
INSTALLATION INSTRUCTIONS
Handles come installed backwards. Remove handles and reinstall properly
on the front. Hand tighten the handles.
BASE INSTALLATION
Carefully, turn the storage shelf over and place the base
onto the storage shelf.
Insert hex bolts into the holes in the corner of the bracket
of the base.
Secure the base to the storage shelf.
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time
TM
Level
INSTALLATION INSTRUCTIONS
10'
Drill
Tape Measure
Hex Wrench
Female Nut
Hex Bolt
Hex Wrench
KENT
TM
STORAGE SYSTEM
Safety Glasses
Advertisement
Summary of Contents for Xylem KENT
- Page 1 Insert hex bolts into the holes in the corner of the bracket of the base. Secure the base to the storage shelf. Hex Bolt Hex Wrench For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time...
- Page 2 Insert hex bolts into the holes in the corner of the drawer. Secure the storage shelf to the drawer. Female Nut Hex Bolt Hex Wrench For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time...
- Page 3 • Clean up excess water and spills immediately. Use blotting rather than a wiping action. Water left over a long period of time will cause white spots in the finish. Please note that some chemicals may damage the finish. For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time...