Advertisement
Components
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING
RISK OF ELECTRIC SHOCK
Turn power off before inspection, installation or removal.
Properly ground power supply enclosure.
RISK OF FIRE
Use only UL certified wire for input/output connections. Minimum size 16 AWG (1.5mm²).
Follow all NEC and local codes.
Prepare Electrical Wiring
Electrical Requirements
• Limited to use in dry and damp locations.
• The grounding and bonding of the LED Driver shall be done in accordance with
National Electric Code (NEC) .
• Follow all National Electric Codes (NEC) and local codes.
Layout Recommendations
Channel
Depth
Max.
(in.)
Stroke
4
8
5
9
6
10
7
11
12
≥7
*Density guide designed to maintain a minimum of 600 lux for a single row or 800 lux for multiple
rows at sign face .
FENGJU | Innovative Signage Lighting
1)
3x1.5mm² Power Cable
2) Wire connectors
3) #6 (M3) screws
4) 24V Power Supply
5)
Electronic grade silicone
Single Row
Multiple Rows
Module
Row
Spacing
Spacing
6
2
6
2
7
3
7
3
7
3
FLL Series Installation Guide
Channel
Module
Depth
(mm)
Spacing
Stroke
6
100
6
125
7
150
7
175
7
≥200
Single Row
Max.
Module
Row
Spacing
Spacing
200
150
150
225
150
150
250
175
175
275
175
175
300
175
175
| www.fjled-tech.com | Page 1
Multiple Rows
Module
Spacing
50
50
75
75
75
Advertisement
Table of Contents
Summary of Contents for FENGJU FLL Series
- Page 1 FLL Series Installation Guide Components 3x1.5mm² Power Cable 2) Wire connectors 3) #6 (M3) screws 4) 24V Power Supply Electronic grade silicone BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING RISK OF ELECTRIC SHOCK Turn power off before inspection, installation or removal.
- Page 2 FLL Series Installation Guide Layout Modules Clean & remove all debris from Measure and cut FLL LED strip to the ap- ❶ ❷ the inside of the Light box before propriate length for each Light box . Cuts you begin.
Need help?
Do you have a question about the FLL Series and is the answer not in the manual?
Questions and answers