Yamaha RM50 Owner's Manual page 35

The Setup Recall operation restores all pitched voice parameters to the val-
ues they had before you began editing. You've probably noticed that the pitched :
voice channel mode is represented by the letters "VCE" appearing in the upper
left corner of the LCD. If you've changed any of the parameters for channel 10,
the letter "V" will have changed to a small letter to indicate that the setup has
been edited. |
Unedited setup
You can use the Recali function to switch between the unedited and edited
settings as long as the "v" is small. Once you begin editing the pitched voice
setup for another channel, however, the setup data you last selected will Gecome @ 4g
permanent, and further recall will be impossible.
You cannot use the Rhythm Kit Copy function when editing a pitched voice
setup. As its name implies, this operation is only available with the rhythm kit
channel mode. For this reason, a line of dashes will appear in the bottom row of
the display when you select the Rhythm Kit Copy function while editing a
pitched voice.
Exiting Setup Edit Mode To return to Play mode when you're finished editing a pitched voice setup, press
either the [EXIT] key or the [PLAY] key. The RM50 will return to the Play
mode display pictured at the beginning of this tutorial. The next time you enter
Setup Edit mode to edit a rhythm kit or pitched voice, the LCD will display the
Setup Edit page you last selected in this mode.
26