Advertisement
Press DISPLAY
to display or remove the overlay.
Channel
Caption
(See page 28,)
Function Status
"\..
Current Time
Counter
Rec
Remaining
(OTR mode only,
see page 12.)
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signalwith
the
Weak Signal Display set to OFF (see
page 27), the screen wi(I turn solid blue.
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See page 28.)
Tape Speed
Warning
and Instruction
Displays
m
GHE(
iii!!iTOi6;
I iN_ii(
I VIDE(
IPLEA
liCAS_
Eta:
I_R
These displays will alert you to a missed
operation or provide further instructions.
If you attempt to set or review a Timer Recording,
or set the On-Timer
and the Clock is not set,,.
If you press REC, and a cassette is inserted with
no record tab.,.
If you press STOP during a Timer Recording...
if you press PLAY, FF, REW, or REC without a
cassette
inserted...
If the unit is not in Stop mode of a cassette with
record tab is not inserted two minutes before a
Timer Recording is about to begin...
If head cleaning becomes
necessary while playin 9
back a tape...
• If you press a function button other than STOP/EJECT
or POWER while the unit is in VCR Lock mode...
8-11
3,12
23
12
22, 23
4
27
32
Advertisement
