SSD Module Remove
Using a cross-head screwdriver, remove the screw located on the SSD, and then pull the
SSD horizontally out of the SSD socket to separate it.
The SSD screw is shorter than other screws. Keep it separately.
Remove the second SSD using the same method if there is the second SSD on
•
the main PBA.
Check the number of screws that have been removed, and store them carefully
•
to make sure that no unassembled screws are left inside the computer during
assembly.
After you finish disassembling, refer to
reassemble.
2
SSD Module Assembly
Disassembly and Assembly
1
for how to
32