Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SL Mini Max af
Summary of Contents for SL Mini Max af
- Page 1 SL Mini Max af...
-
Page 2: Safety Instructions
No user-servicable parts! Heat generation: The housing of SL may heat up; so make sure that you always keep the light at a safe distance to any combustible or flammable materials. Could cause fire or death! However, quiescent operation (without cooling the light housing via airflow or the like) is possible at any time and will not damage the product. -
Page 3: Battery Mounting
When mounting the quick release, note the position of the O-rings. One O-ring should be between the holder and the lamphead and the other one between the holder and the screw. Position the lamp centric at the handlebar. Now close the bracket of the quickrelease so the SL is moun- ted tight in its position. -
Page 4: Operation
By connecting the battery to the lamphead it turns on automatically. The lamp can also be switched on by a short press on the button of the lamp head. Depending on the ambient light, the SL starts lighting either with low beam Keep the small button pressed (let go to select) until the lamp lights up as many times you‘ll need it to. - Page 5 Operation Smartcore battery Lamphead informations Capacity indicator At the remote: Audible: = 100 % High beam is activated. To check the capacity, simply press the touch-pad once. At first an audible signal will = 80% The „high beam symbol“ of = 60% the remote lights blue sound to give a quick reading in 20% steps.
- Page 6 Bluetooth remote control Bluetooth remote control The Bluetooth Remote comes together with the Peppi V5 barmount. On the bike, the best way to mount Low button cell: the remote is directly next to your grips so you have full control and don't need to take off your hands while With decreasing voltage, the remote control LEDs will shine less bright.
- Page 7 Lupine Light Control 3.0 - für IOS und Android With the new „Lupine Light Control 3.0“ app you get many individual setups. Create custom profiles for your activities, and simply use them when you need them again. Besides the possibility to create your own profiles you can also change the sensitivity and delay of the lightsensor or activate the runtime monitor for your individual battery.
-
Page 8: Troubleshooting
Product Care, Storage and Charging Troubleshooting Problem Solution Cause Product Care and Storage Charge the battery Extremely discharged battery The light does not come on Light: and the power LEDs do not Battery not plugged into the ... -
Page 9: Technical Data
Lamphead with 6.9Ah battery: 340g Lamphead with 10.0Ah battery: 450g Hereby, Lupine lighting systems GmbH declares that the radio equipment type SL AX remote is in com- pliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.lupine.de/documents/ce... -
Page 10: Declaration Of Confirmity
Declaration of confirmity Declaration of confirmity Canada: Regulations: This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). The laws governing the allowable application domain for this lighting system may vary from one Operation is subject to the following two conditions: country to another.
Need help?
Do you have a question about the Mini Max af and is the answer not in the manual?
Questions and answers