Advertisement
Table of Contents
ULTIMAX 8040 DUAL BAND BAZOOKA
Thank you for the purchase of the ULTIMAX8040 dual
band double bazooka covering 80&40 Meters which is
accomplish by the use of no loss Hy-Q coils which
allow
for
dual
band
operation
by
adding
a
broadbandwidth with low SWR in both bands, handling
legal limit with ease.
Installation:
1- lift the Apex (center) to at least 30-35' feet
2- lift the ends insulators to at least between
15-18' feet off the ground, acchive an invert "V".
3- Please avoid any other type of configuration
4- Use common sense, safety first keep away from
electrical wires.
5- Used ONLY RG-213, RG-8/U or RG-8X (don't used
coax with aluminum foil in the shield.)
Tuning:
Advertisement
Table of Contents
Summary of Contents for Ultimax 8040
- Page 1 ULTIMAX 8040 DUAL BAND BAZOOKA Thank you for the purchase of the ULTIMAX8040 dual band double bazooka covering 80&40 Meters which is accomplish by the use of no loss Hy-Q coils which allow dual band operation adding broadbandwidth with low SWR in both bands, handling legal limit with ease.
- Page 2 : By simply folding in the ends making shorter will raise the resonance in 75/80M, after achieving the proper resonant point use the included zip tie and push against the insulator and make tight, for the remaining loose tail use electrical tape and keep it parallel to it.
- Page 3 Example B: Please follow the instructions correctly no chokes , baluns are needed. Thank you again for your purchase for customer support please go to: www.ultimax-antennas.com...
Need help?
Do you have a question about the 8040 and is the answer not in the manual?
Questions and answers