Advertisement
Playback
1
Search for the beginning of the end ID with the >>
button.
(See page 22.)
When the end ID is detected, "EE" lights.
2 Press END ID ERASE.
The END ID ERASE indicator lights while the end ID is
being searched for and then goes off when the end ID is
erased,
lf you want to start recording from the point where the end
ID is written, you need not press END ID ERASE.
32
1
Make sure that TIMER is set to OFF, and then turn on
the power.
2 Insert the cassette and press & to load the cassette.
3 Press p>.
Playback begins.
If an end ID is written on the tape, playback stops
automatically at the end ID position, and the tape will be
rewound to the beginning.
To control tape transport
Press @.
To stop playback
To stop playback for a moment
To release pause and restart
Press
or >.
playback
Toremove the cassete
To rewind or fast-forward the
Stop the tape and press
tape
<4 or >>.
Cue/review operation
To advance the} Press »® during | Sound is heard while
tape (cue)
playback.
the button is
pressed.
Release
the button at the
desired point.
Playback resumes.
To review the
Press <4 during
tape
playback.
The speed of the tape increases 4 seconds after the cue or
review starts.
Advertisement
