Sony DTC-670 Operating Instructions Manual page 31

When designating the selection being played back, "-0"
appears.
You can designate a selection by pressing the numeric
buttons, instead of pressing the <4 or mi button
several times. In this case, press the <4 or »» button
after pressing the numeric buttons.
This operation can be performed only with the remote
commander.
1 During the stop mode, press the MUSIC SCAN button.
The MUSIC SCAN indicator flashes and the designated
scan time is indicated at the MARGIN display.
2 Press the » (play) button.
The tape is rewound to the beginning, the first part of each
selection (start ID position) is played back for the time you
designated sequentially.
The » and indicators light during playback.
music sca
AMS ON 7
S ata
4 rn PGM NO.
"1 in 3. an = Fas IN
When you press the mPibutton instead of the > (play)
button
The nearest start ID after the current position is detected,
and, after playing back the first part of that selection for the
time you designated, the next start ID in the forward
direction is located.
This operation continues until the end of the tape.
When you press the 4 button instead of the > (piay)
button
The neareststart iD before the current position is detected,
and, after playing back the first part of that selection for the
time you designated, the next start ID in the reverse
direction is located.
This operation continues until the top of the tape.
To designate the desired scan time
While the scan time is indicated at the MARGIN display in
step 1, press the <4 or »® button. You can designate the
scan time up to 15 seconds in steps of a second. The scan
time is 8 seconds if the scan time is not desingated. (The
designated time remains memorized even if you turn off the
unit.)
To listen to the beginning of a selection for more than
the designated time
Press the ® (play) button while the selection you want to
listen to is played back.
While pressing the ® button, the countdown at the MARGIN
display stops, and the playback of that selection continues.
To listen to an entire selection
Press the MUSIC SCAN button while the selection you want
to listen to is played back.
The music scan function is released, and the playback of
that selection continues.
When you press the MUSIC SCAN button during playback,
the tape is rewound to the beginning, and then the first part
of each selection (start ID position) is played back for the
time you designated sequentially.
31