Download Print this page

NENKO 21893170 Quick Start Manual

Lightning aroma diffuser with speaker

Advertisement

Quick Links

1. Product name
Lightning Aroma diffuser with speaker
2. Product code
21893170
3. Colour
As pictured
4. Description
This nebulizer moisturises the air while providing a delicious smell in the space by adding an essential
oil.
5. Sensory stimulation
See, hear and smell
6. Safety
Fiber Optics products are a constant source of safe tactile and visual stimulation. However, always use
them only under professional supervision. Even though it is safe to iron the threads along the face,
never put them in the mouth. Periodically clean the Fiber Optics with a clean damp cloth. However,
switch off the light source first.
7. Specifications model
Size aroma diffuser: 14.5 x 12 cm
Weight (excluding adapter): approx. 520 grams
Cord length: approx. 120 cm
Tank capacity: 500 ml
LED lighting: 9 bulbs
8. Maintenance
After 5 6 times use, or 2 3 days, clean the product as follows:
Disconnect the appliance from the mains and remove the lid.
Pour any remaining water from the "drain side" of the tank.
Disconnect the mains cord from the base of the appliance.
Put 1 tablespoon of citric acid in the water tank, add a little less than 100 ml of warm water (up
to 70 ° C)
Let it soak in for 5 minutes and drain the solution from the "drain side" of the tank.
Wipe it with a Sat
Never use other acids, enzymes or cleaning agents, as this may cause toxic gas to form or a
malfunction may occur.

Advertisement

loading

Summary of Contents for NENKO 21893170

  • Page 1 1. Product name Lightning Aroma diffuser with speaker 2. Product code 21893170 3. Colour As pictured 4. Description This nebulizer moisturises the air while providing a delicious smell in the space by adding an essential oil. 5. Sensory stimulation See, hear and smell 6.
  • Page 2 The lid has an inner cover that can also be removed for cleaning. 1. The lid has an inner cover that can also be removed to be cleaned. 2. After cleaning the inner valve, replace by holding the handle and push the inner and outer valve down until you hear “click”.
  • Page 3 10. Installation 1. Place the product upside down and remove the top cap. 2. Connect the AC adapter to the base of the DC connection. It is located at the bottom of the product. 3. Use the measuring cup to remove water from the water pipe. Caution, do not pour water from the cup and do not fill the water tank with the measuring cup.
  • Page 4 Bluetooth speaker Is not connected to the adapter, the Connect the adapter or charge normally cannot be battery is sufficient. No more is after use. played. needed, just batteries. For more information, visit our website www.nenko.com...