Pakronics DIY SOUND RECORDER Assembly

STEP 1
Assemble the
recording module to
the base board by
screws. Put the shaft
sleeves under the
screws.
STEP 5
Penetrate the wires
of the battery case
into the hole of
cover. Paste the
battery case to the
cover.
STEP 9
Assemble the front
side board into the
base board.
NOTES:
1.When assemble the recording module, don't forget to put the shaft sleeves under the screw.
2.Please check the direction and position of the dupont line and wires of speaker if the
recorder doesn't work.
3.Please check the direction of the wires when connect the wires of battery case with the
connector.
Please prepare two AA batteries. Batteries don't include in this kit.
ASSEMBLY PROCESS:
STEP 2
Insert dupont line
into the recording
module.
STEP 6
Connect the wires of
the battery case to
the connector.(pay
attention to the
position of wires)
STEP 10
Paste the foams to
the bottom.
STEP 3
Paste the wire
connector to the
base board. Connect
the wires of dupont
line with the
connector
STEP 7
Penetrate the wires
of speaker into big
hole of cover.
STEP 11
Assemble the cover
board with the side
boards. Press the red
button to record the
sound. Press the
black button to play
the sound.
STEP 4
Assemble the side
boards.
STEP 8
Paste the speaker to
the cover. Insert the
wires of speaker into
the recording
module.