Samsung DVD-M101 Instruction Manual page 5

_]_ STANDBY / ON
• When the unit is first plugged in, the indicator lights,
When StANDBY/ON is pressed on again, the light
goes out and the player is turned on.
O DISCTRAY
• Load the disc here.
DISPLAY
• Operation indicators are displayed here.
_]_ OPEN/CLOSE
, Press to open and close the disc tray,
PLAY/PAUSE
, Begin or pause disc play.
STOP
. Stops disc play,
SKIP
o Use to skip a scene or music.
O Angle indicator, Youcan selectmultiple angles
of a scenerecorded by different cameras.
Disctype indicators
O Reverse play / Pause/ Forwardplay
Lightswhen 3D surround is turned on,
DVD : Title number
DVD : Chapter number.
Video/Audio CD : Pack number
Repeat play mode
LinearPCM audio output
Dolby Digital Disc
DTS (Digital Theater System) output
MPEG-2 Audio output
Displays various messages concerning
operations such as PLAY, STOP, LOAD, RANDOM ....
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
O
DIGITALAUDIO OUT JACKS
, Use an optical cable to connect to a compatible Dolby Digital receiver, Use to connect to an A/V
Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
, Connect to the Audio inputjacks of your television, audio/video receiver,or VCR,
O
O
O
VIDEO OUT JACK
, Usea video cable to connectto the Video input jack on your television.
S-VIDEO OUT JACK
, Use the SMdeo cable to connect this jack to the S Mdeojack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELEC£
COMPONENT VIDEO OUT JACKS
, Usethesejacks if you have a TV with Component Video injacks. These jacks provide Pr,Pb and Y video.
Along with S-Video, Component Video providesthe best picture quality, The Y, Pb, Pr must be selectedin
the VIDEO OUT SELECT.
O
VIDEO OUT SELECT SWITCH
, Use the switch to set video out.
, if Y, Pb or Pr is selected, S_Video will not work.
, if S-Video is selected, Y, Pb or Pr will not work.
8 9