Advertisement
5. OPERATING INSTRUCTIONS
WARNING! Ensure you have read, understood and apply chapter 1 safety instructions before using the cleaner.
5.1.
Check that the washer power switch is in the off position, and that the unit is unplugged from the mains power supply.
p
5.2.
Fill the tank to appropriate capacity (Min 24ltrs, Max 48ltrs) with Sealey solvent, or a general purpose degreaser (contact your local
dealer for supply). DO NOT use any other type of solvent. CAUTION! Ensure you follow any instructions provided with the solvent.
5.3.
Ensure the pump is immersed correctly in the solvent.
5.4.
Plug the washer into the mains power supply and switch the unit on. Check that solvent flows freely through the flexible spigot.
5.5
Place parts to be cleaned into the cleaning basket, direct spray nozzle onto parts. Ensure any splash back stays inside the tank
if not reposition the spray nozzle. For ground in marks, leave the part to soak in the bottom of the tank. Brush parts with cleaning
brush if required.Turn off the pump and leave the parts to drain either in the basket, or if too large on the shelf.
5.6.
To activate turbo agitation, ensure the air line is connected and turn the regulator valve on to the required output pressure.
5.7.
When cleaning is complete turn the washer off and unplug from the mains power supply.
5.8.
p WARNING! DO NOT allow uncontrolled discharge of fluids thus polluting the environment. Dispose of waste liquids in accordance
with local authority regulations.
5.9.
Keep the parts washer clean. Remove and clean the filter regularly for best and safest performance.
6. PARTS LIST
Original Date:
151099
Issue Date:
151099
Version No:
Date Modified:
N/A
WORKSHOP CLEANING TANK MODEL SM20T
93/68/EEC CE Marketing Directive
89/336/EEC Directive (S.I. 1992/2372) & Amendments
89/392/EEC Machinery Directive (S.I 1992/3073)
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required
for any claim. INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
0
Declaration of Conformity
is
in conformity with the following EEC standards and directives
The construction file for
Sealey Ltd
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
0No. Part |No
Description
1
SM20T/01
TANK
2
SM20T/02
LID
3
SM20T/03
SAFETY LEVER
4
SM20T/04
RIVET + R-TYPE PIN
5
SM20T/05
BLIND RIVET
6
SM20T/06
SAFETY TIN PLATE
7
SM20T/07
PLUG
8
SM20T/08
LOWER SHELF
9
SM20T/09
LEG
10
SM20T/10
PAN SCREW
11
SM20T/11
SPRING WASHER
12
SM20T/12
HEX. NUT
13
SM20T/13
TURBO SPIGOT
14
SM20T/14
HEX NUT
15
SM20T/15
FIBBER WASHER
16
SM20T/16
THREADED ADAPTOR
17
SM20T/17
TURBO CONTROL VALVE
20
SM20T/20
WORK SHELF
21
SM20T/21
PARTS BASKET
We, the sole importer into the UK, declare that the product listed here
Signed by Mark Sweetman
this
product
is
held by the Manufacturer and may be inspected on request by contacting Jack
For Jack Sealey Ltd. Sole importer into the UK of Sealey
01284 757500
01284 703534
No.
Part |No
Description
P1
SM20T/P01
PUMP HOUSING
P2
SM20T/P02
PUMP
P3
SM20T/P03
FLUID HOSE
P4
SM20T/P04
HOSE CLAMP
P5
SM20T/P05
PUMP ANCHOR
P6
SM20T/P06
SELF TAPPING SCREW
P7
SM20T/P07
RUBBER GROMMET
P8
SM20T/P08
SWITCH BOX
P9
SM20T/P09
SWITCH
P12
SM20T/P12
HOUSING FRONT COVER
P13
SM20T/P13
FILTER
P14
SM20T/P14
FILTER COVER
P15
SM20T/P15
HOUSING TOP
P16
SM20T/P16
FLEX HOSE
P17
SM20T/017
SCREW & WASHER PACK
Date
15th October 1999
Quality Machinery
E-mail: sales@sealey.co.uk
SM20T -0016- (1) - 151099
Advertisement
