To Use Timer Function - Panasonic NN-C980B Operating Instructions Manual

To Use Timer Function
Panasonic
DIM(HSIOM4^»W
ticraPowKj Q BrodT 1
^^<S2H2222&
-
Bakm J) Qbmb/m .f j ofT^
— Caffy^cOcxT Coo*^iy -
■
""pouttry**}
^ MmT^)
— — Sfmof Cooking
'Porjlo#i7**N Wc#/ "
) r %Mor»/Laaa
2 3
5
r
r
/
9
0 Clock
This feature allows you to program a Standing Time after
cooking is completed and to program the oven as a
minute timer and/or to program delay start.
To Use as a Kitchen Timer
/
1 Press Timer
/
2 Set Desired
Amount of Time
using number pads
(up to 99 minutes and 99 seconds)
3 Press
"*• Time will count down without oven
operating.
Stop/Rsset
I 1
Start
To Set Stand Time
Set Desired
Cooking
Program
e.g. High 10 min. Press. Set desired
(See page 12) amount of stand
time.
To Set Delav Start
Press.
Cooking will start.
After cooking, stand
time will count down
without oven operating
Set
Desired
Cooking
Program
Press Set desired amount e.g. High 10 min. Press
of delayed time. (See page 12)
After completed
delayed time,
cooking will start.
NOTE:
1. When the first/second stage has finished, a two beep signal is heard. After all the stages have been
completed, the oven will beep five times.
2. If oven door is opened during the Stand Time or Kitchen Timer, the time in the
Menu Action Screen
Display
will continue to count down.
3. Delay Start cannot be programmed before any Auto Control Function.
This is to prevent the starting temperature of the food from rising before defrosting or cooking begins.
4. Timer can be set up to 99 minutes and 99 seconds.
22