Table of Contents
Advertisement
Æ Rear Panel
LINE OUT
R
L/MONG
@ LINE OUT
These jacks provide stereo output to amplifiers,
stereo systems, tape recorders, or similar
equipment.
Use the L/MONO jack when using only one output.
@ LINE IN
These jacks connect two channels of output from
other electronic instruments to the piano's speaker.
Use the L/MONO jack when using only one input.
«Note: This input bypasses the piano's VOLUME
control.
To adjust the balance, you must use the
output volume controls on the individual
instruments.
® MIDI
These jacks allow communication with other gear
equipped with MIDI.
© PEDAL jacks (behind this mark)
These jacks are used to connect the damper and
soft pedals.
LINE IN
R
L/MONO
Sse
MIDI
THURU
OUT
IN
« The pedals
From right to left, the pedals are the damper pedal
and the soft pedal.
i
L Damper
Soft
Damper pedal: Pressing this pedal sustains the
sound even after removing the hands from the
keyboard.
Soft pedal: Pressing this pedal softens the sound,
and also reduces its volume.
* The soft pedal can be used as the sostenuto pedal
by turning on the power while depressing this
pedal.
Sostenuto pedal: Depressing this pedal after
pressing the keyboard and before releasing the keys
sustains the sound of only the keys just played.
+ Sliding key cover
Do not place heavy objects on the sliding key cover
or subject it to severe shocks. Also, the sliding key
cover should be opened and closed gently, using
both hands.
Advertisement
Table of Contents
