Advertisement
Quick Links
Important Safety Instructions:
For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does
•
not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug.
These instructions are provided for your safety. It is very important that they are read carefully and completely
•
before assembling fixture.
This fixture has been rated for up to (1) 60-watt maximum TYPE A bulb or (1) 9W LED light bulb (Included). To
•
avoid the risk of fire, do not exceed the recommended wattage.
•
This lighting fixture is intended for indoor, residential use.
Warning:
Wires and cables are all attached (further wiring is not needed). When unpacking product, be careful to not pull
•
wires as it may result in a bad connection. Do not plug into electrical outlet until lamp is fully assembled.
•
To reduce the risk of fire, electrical shock or personal injury, do not turn on lighting fixture until light bulb is installed
and assembly is complete.
•
Always turn off the light fixture and allow it to cool before replacing the light bulb.
Care Instructions:
Wipe with soft dry cloth only.
•
•
Always avoid the use of harsh chemicals or abrasives as they may cause damage.
1 / 4
ASSEMBLY INSTRUCTIONS
Athena Floor Lamp (Item # MT154-0070)
Advertisement
Related Manuals for Martha Stewart MT154-0070
Summary of Contents for Martha Stewart MT154-0070
- Page 1 ASSEMBLY INSTRUCTIONS Athena Floor Lamp (Item # MT154-0070) Important Safety Instructions: For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does • not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug.
- Page 2 Pre-assembly: Remove all parts and hardware from box along with any plastic protective packaging. Check that all parts listed are included. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or ...
- Page 3 Assembly Instruction: Step 1. Unpack and place all parts on a surface or floor. Step 2. Gently screw the rod (B) into the body (A). Step 3. Gently screw the rod (C) into the rod(B). Step 4. Screw the socket (D) into the rod(C). Step 5.
- Page 4 Step 6. Place the shade (G) over the harp (E). Secure the shade (G) by turning the finial (H) onto the harp top clockwise until tight. Step 7. Assembly is completed. 4 / 4...