Keyboard Voices; Voice Selection - Williams Piano Symphony User Manual

The Symphony offers 128 GM voices in 16 groups plus 10 Asian ethnic folk instrument voices.
A complete list of all 138 voices can be found in the back of this manual.

Voice Selection

SELECTING ONE OF THE 138 VOICES
1. If the Voice mode indicator is not already lit, press the VOICE button to engage the voice selection mode.
The indicator will light up.
2. Use the numeric pad or the +/YES, –/NO buttons to select a voice number. The voice name and its
number will be shown on the display.
NOTE: When using the number pads, you must enter three digits to select a voice number from 001-138. For example,
to select voice No. 2 you must enter "002". Please refer to the back of the manual for a list of all available voices.
QUICK SELECT
Each Voice button controls two voices, one in the A bank (printed above the voice button) and one in the
B bank (printed below the voice button) for a total of 10 Quick Select voices (8 Presets and 2 User-defined).
To recall a Quick Select voice:
1. Press the A/B (Above/Below) button to select a bank. Selection alternates between A and B banks every time
the A/B button is pressed. The A/B button is lit when the B bank is selected.
2. Now press one of the five Quick Select voice buttons to select the desired voice. The voice name and
number will be shown on the display.
USER DEFINED QUICK SELECT BUTTON - VOICE
You can assign your 2 favorite voices to the voice Quick Select button in the following manner:
1. Press the voice USER button (selects USER 1 for bank A, or USER 2 for bank B).
2. Select the desired voice by using the numeric pad or the +/YES, –/NO buttons.
3. Press another Quick Select voice button.
4. The last selected voice will be assigned to the USER button to be available for quick selection.
NOTE: The USER button will revert to the default setting when the power is turned off. (USER 1=012: Vibraphone,
USER 2=092: Choir Pad)
14

Keyboard Voices