Advertisement
№
Name/function
1
Back to main interface
2
Name of device
3
Change settings
4
Status of device
5
Switch on/off
Operating instructions
1.
The main interface of the "Smart Life" app is as follows after the successful connection of the
thermostat:
2. Click on the green button
on or off. The colour of the display light is blue; this means that the thermostat is switched on.
You may also press the key of the thermostat to switch it on or off. When doing so, the colour
of the symbol in the app will change as well.
3. Click on the device name that you have given the device, e.g., "Infrared heating," to call the
thermostat interface.
4. Via the button
least 0.5℃ higher than the ambient temperature for the heater to be switched on.
5. Via the button
program the heating so that the operation and desired temperature changes over the week. The
switch-on and switch-off time being separate, they must be entered separately. Do not forget to
set the week key to green after programming.
6. Via the button
mostat.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
(in the main interface) to switch the power supply of the heating
, the power supply is switched on and off. The temperature set should be at
, the weekly programme is set. Via the weekly programme, the user can
, the timer is called, that can be set for automatic switching-off of the ther-
Item 64397
№
Name/function
6
Temperature adjustment
7
Swap between ℃ and ℉
8
Weekly programme
9
Timer
Page 7
07 2023-1
Advertisement
