Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LABSTAC MSC41-060ST
Summary of Contents for LABSTAC MSC41-060ST
- Page 1 OPERATION MANUAL STEREO ZOOM MICROSCOPE MSC41-060ST...
- Page 2 Choose the optical system ………………………………...….10 Mount the photo eyepiece and the PK mount adapter 4-10 ……10 Adjust the brightness of the bottom light 4-11 ………………...….10 Replace the lamps 4-12 ………………………………………....…10 Replace the fuse 4-13 …………………………………....………..10 Configuration ……………………………………………....……11 Technical parameter ……………………………….….....………13 Troubleshooting …………………………….……..…....………15 www.labstac.com...
-
Page 3: Before Use
After using cover the microscope with the dust cover provided and store it in a dry and clean place free from moisture to prevent rust To keep the performance of the microscope please check it periodically www.labstac.com... - Page 4 STEREO ZOOM MICROSCOPE 2 Nomenclature Eyepiece shield Eyepiece Illumination device Diopter adjust ring Focusing knob Head Bracket Lock-screw Glass stage Clip Base Fuse Bottom variable light control Bottom variable light control www.labstac.com...
- Page 5 STEREO ZOOM MICROSCOPE Eyepiece shield Eyepiece Photocube Illumination device Diopter adjust Focusing knob ring device Head Bracket Lock-screw Base Glass stage Clip variable light control Fuse Switch Bottom variable light control www.labstac.com...
- Page 6 STEREO ZOOM MICROSCOPE 3. Assemblage www.labstac.com...
- Page 7 STEREO ZOOM MICROSCOPE PK-mount adapter Photo eyepiece Eyepiece shield C-mount Eyepiece Illumination device Head Clip Glass stage Base www.labstac.com...
-
Page 8: Operation
1) Turn the focusing knob and observe the specimen through the right eyepiece till the image of the specimen is clear 2) Observe the specimen through the left eyepiece and adjust the diopter adjustment ring till the image is clear ① . 3) Fig. 4 www.labstac.com... - Page 9 4-8 Install the illumination device Insert the illumination device in the bracket with ① protrudent side toward the lock screw and tighten the lock ② screw Fig 2) Put the plug into the socket of the pillar stand www.labstac.com...
- Page 10 4-13 Replace the fuse 1) Screw the fuse tube out with a screwdriver and the pull the fuse out of the tube ①. Remove the fuse and mount it in an adverse way Fig . 12) ① . 12 www.labstac.com...
-
Page 11: Configuration Chart
Hold for illuminator SZPD Photo SZMPH device Gem clamp S ST GC Ring fluorescence SZRL О О Light Inside foam О О О О О О Outside carton Note: The items marked О included and others for option “ ” www.labstac.com... - Page 12 STEREO ZOOM MICROSCOPE www.labstac.com...
-
Page 13: Technical Parameter
ST Hz 110 -50/ 110 -50/ Input Input :220/110 :220/110 Transformer Output Output W halogen W halogen 12 /15 12 /15 light lamp lamp Illumina Botto W halogen V 、 7W 12 /15 220 /110 lamp fluorescence lamp light www.labstac.com... - Page 14 Mount the head in the bracket hole whose head diameter is φ76 The degree of adjustable by rotating the Main Focusing device focusing knob body Range of single adjustable Glass stage Diameter ：φ95mm Clips Put it on the base from top www.labstac.com...
-
Page 15: Troubleshooting
10. Bulb is burned out Control the voltage suddenly The voltage is too high Eg use voltage regulator Replace with a Use the wrong bulb 11. Brightness is not correct one enough Increase the input The voltage is too low voltage www.labstac.com... - Page 16 STEREO ZOOM MICROSCOPE The bulb will burn out Replace with a new 12. The bulb flickers or soon the brightness is The bulb was not unstable Insert it correctly inserted correctly www.labstac.com...
- Page 17 STEREO ZOOM MICROSCOPE Email: contact@labstac.com Website: www.labstac.com www.labstac.com...