Page 1
OPERATION MANUAL for C3D Pedometer PLEASE READ BEFORE OPERATING FUNCTIONS 1. SET button 7. Chime 2. Step target LED 8. Lanyard loop 3. RESET button 9. Detachable clip 4. LCD Display 10. System reset hole 5. Memory button 11. Battery cover screw 6.
Page 2
• PRESS MODE / RESET to set your daily step target in intervals of 1,000 steps. Steps less than 1,000 will be in intervals of 100s. • PRESS SET to save daily step target. Congratulations your C3D pedometer is ready to go!
Page 3
USING AND UNDERSTANDING YOUR C3D PEDOMETER 1. CLOCK FORMAT – 12H format displays PM only. 2. PEDOMETER FUNCTIONS A. TOTAL STEP PRESS MODE until the word TOTAL is shown at the top of the screen. This shows all time totals since the pedometer was activated.
Page 4
0. 3. USING THE MEMORY FUNCTION The C3D stores up to 7 days data. The data for the day is automatically stored in memory when the clock time reaches 12am midnight. The display will reset to 0 for the new day. Warning: Changing clock time may affect data stored in memory.
Page 5
6. SLEEP MODE When the C3D is left idle for 30 seconds, the LCD will shut off automatically to conserve battery power. The pedometer will wake up and begin counting once it detects movement. 7. PERFORMING A SYSTEM RESET...
Page 6
SPECIFICATIONS Battery: CR2032 x 1 (included) Step counter: up to 99,999 steps Safety lanyard (included) Belt clip (included) Questions eMail : help@ozofitness.com Online www.ozofitness.com/C3D...
Need help?
Do you have a question about the C3D and is the answer not in the manual?
Questions and answers