WALL'S REFRIGERATION SOLUTIONS Cily 450 Care Manual

Below are some helpful maintenance tips and
operational instructions to ensure you get the most
from your cabinet and can care for it well!
• For the best performance your cabinet should be positioned on a
flat, level surface in an area which avoids direct sunlight. This
avoids overheating issues and increases reliability.
• There should be a 5cm gap between the rear/sides of the cabinet
and the grille must remain unobstructed to allow for adequate
airflow.
The cabinet will function inefficiently in a room with an ambient
•
temperature above 35˚C
• The cabinet should be left to stand for 12 hours before being plugged in for the first time.
• The cabinet should be plugged into a suitable 13-amp electrical supply. It should be plugged
directly into the mains supply socket and
• It will take approximately 24-hours for the cabinet to reach the required temperature, products
should not be placed inside the cabinet until the operating temperature has been reached.
• The cabinet will begin to work once plugged into an electrical supply.
• This cabinet is not
inside the cabinet.
Cabinet Care Guide
Positioning Your Cabinet
Operating Your Cabinet
designed to freeze products. Products should be frozen before being placed
not attached to an extension lead or adaptor.
Cily 450