Related Manuals for FILTRINOV GS14
Summary of Contents for FILTRINOV GS14
- Page 1 INTEGRATED FILTERING WALL Installation and operating instructions. Read carefully and retain for future reference. GS14 RANGE GS14 MIRROR RANGE...
-
Page 2: Table Of Contents
CONTENTS ................ P.3 Recommendations ......P.4 Technical description of the filtering wall ....P.5 Technical description of the mirror filter wall ..................P.6 Installation ..................P.8 POOL-EARTH ..............P.8 Electrical connections ..............P.9 Starting the filter wall ........... P.9 Filtration: Operating principle ................ -
Page 3: Recommendations
RECOMMENDATIONS TO PREVENT WATER INGRESS INTO THE NON-WATERTIGHT GS14 TANK WE ADVISE YOU TO INSTALL A DRAIN ALL AROUND THE POOL THAT RUNS INTO A RELIEF WELL CONTAINING A BASEMENT SUMP PUMP. CLEAN THE CARTRIDGE AND EMPTY THE BASKET AT REGULAR INTERVALS... -
Page 4: Technical Description Of The Filtering Wall
TECHNICAL DESCRIPTION OF THE FILTERING WALL Wide-mouth skimmer 2 Multi-directional nozzles Colour LED light + Remote control Removable lid with mechanical lock In-ground section containing the filter ele- ments and optional items Overflow... -
Page 5: Technical Description Of The Mirror Filter Wall
TECHNICAL DESCRIPTION OF THE MIRROR FILTERING WALL Skimmer miroir pour aspiration 2 Multi-directional nozzles Colour LED light + Remote control Removable lid with mechanical lock In-ground section containing the filter ele- ments and optional items Overflow Low-level suction FILTRINOV GS 14 / M 052584... - Page 6 TECHNICAL DESCRIPTION OF THE FILTER WALL (cont.) IN-GROUND SECTION Filter pump: 14m /h - 3/4cv - 0.5kw Cartridge filter + basket: 4.5m² - 25µ Control panel incl. transformer and timer Overflow INSTALLING THE FILTER WALL Fit and secure the formwork Product is designed for a film on the front and back of the filter liner or reinforced PVC liner seal...
- Page 7 The overflow is to be hooked up to a drain outlet or other water drainage point (Ø 50). If the water level in the pool rises too high, the water is quickly carried away via the overflow to prevent it flooding over the top.
-
Page 8: Pool-Earth
They can also disrupt the treatment probes, resulting in incorrect amounts of product being injected. This is why FILTRINOV has included a pool earth with these products. Screw it into the threaded attachment point provided and connect it to the earth rod with a Ø... -
Page 9: Starting The Filter Wall
Remember to fit the basket and its pre- filter. All FILTRINOV filtration units are checked and tested with the utmost care and subject to FILTRINOV’S stringent quality controls. The use of non FILTRINOV-approved parts and consumable items shall render the pump and hydraulic system warranty void. -
Page 10: Setting The Timer
SETTING THE TIMER • Continuous mode (24-hour filtration) Move the filter switch on the outside of the electrical panel to «Manual». • Auto mode (timed filter operation) a) Move the filter switch on the outside of the electrical panel to «Automatic». b)Turn the clock hands to set the exact time relative to the pointer (triangle) on the right of the clock (in the example below, the time is midday). -
Page 11: Vacuum Point For Manual Suction Cleaner Or Hydraulic Robot
VACUUM POINT FOR MANUAL SUCTION CLEANER OR HYDRAULIC ROBOT • Connect one end of the hose to the suction cleaner • Hold the suction cleaner by the handle and insert it into the pool • Gradually insert the hose into the water until the water pushes out the air (tip : you can fill the hose with water by placing its tip in front of the filtration unit nozzle with the filtration unit running) •... -
Page 12: Customisation
pH CONTROLLER • The pH controller consists of a peristaltic pump, a probe sensor, and an injector. Read the accompanying settings, operating and maintenance guide. It is strictly forbidden to store pH containers inside the tank. External container CUSTOMISATION A // We also have a range of colour lids available for your filter wall in grey, charcoal grey, and beige. - Page 13 PUMP DISASSEMBLY AND WINTERISING • Active Winterising : An actively winterised pool continues to operate at a slower than normal rate throughout wintertime. This is the recommended winterising procedure in less cold regions. If you live in a harsher winter climate, you should choose to passively winterise your pool instead.
-
Page 14: Trouble Shooting
FAQ / TROUBLE SHOOTING FILTERS/PUMPS PROBLEM : Low pressure flow and/or air bubbles in the pumped water flow CAUSE SOLUTION • SITUATION 1: The cartridges are dirty but not clogged. Clean the cartridges at more regular intervals (once every fortnight) •SITUATION 2: Renew the cartridges if they are clogged Cartridges •SITUATION 3: If you are using a flocculent or anti-algae treatment, lower the water level by 20 cm and renew the cartridges... - Page 15 FAQ / TROUBLE SHOOTING PROBLEM : The pump cuts out and starts up again later CAUSE SOLUTION • To prevent the pump and its thermal circuit breaker from overheating, we advise you to programme your filter system to run for no more than 3 or 4 hours at a time with a 1-hour break between operating periods.
- Page 16 FAQ / TROUBLE SHOOTING LIGHTING PROBLEM : The light is blinking. CAUSE SOLUTION The light is reaching the end of its service life or is not/no longer watertight. Replace the light using a niche (feed-through) system. Light AUTOMATIC WATER TREATMENT PROBLEM : The electrolyser unit does not switch on.. CAUSE SOLUTION Electrolyser circuit breaker in...
- Page 17 FAQ / TROUBLE SHOOTING PROBLEM : The pH probe is giving incorrect readings. CAUSE SOLUTION •A stray current is probably interfering with your probe reading. Use a glass water to check if this is the case : 1. Dip the probe into a glass of tap water (pH level between 7.5 and 8.0) and see if the reading is consistent. 2.
Need help?
Do you have a question about the GS14 and is the answer not in the manual?
Questions and answers